Ihr Warenkorb ist leer
Ihr Warenkorb ist leer 10000L (or GAL) will be accurate to two decimal places, when the total water consumption is greater than 9999.99 L (or GAL)
The decimal point will be hidden.The maximum measurement 999999L (Note: If the upgrade, if the unit is set
Into the GAL, also count 999999L clear 0, that is, remember to 219969GAL clear 0), after more than
Remeasurement starts at 0.
6, K value setting character (K SETTING)
The K value setting character will be displayed when entering the interface number: 00 for the K value setting interface (K SETING)
Show it
7, Total Traffic Character (TOTAL)
When the system is powered on, the total flow character is displayed on the main screen.
, three, and interface description
1, how to set the system operating mode
Use the battery three AAA battery interface to power the system.(Not include battery)
2, the main interface and the main interface
The characters TOTAL, total water consumption, temperature, total usage time, etc. will be displayed under the main screen.
3. Setting of K value setting interface and K value setting interface
In the main interface, short press "SET" key once to jump to the K value setting interface.
"K SETTING", interface number 00, and K value are displayed under the K value setting screen.
Press the "SET" key in the K value setting interface to set the K value.The first digit of the K value after long pressing the "SET" key
Flashes, short press "+" flashes digits increases by 1; short press "-" flashes digits decreases by 1; short press "SET"
Press to switch to the next digit.After setting, long press "SET" key to save the .
water flow sensor meter flowmeter totameter,digital flow meter inch,2 flow meter sensor,flow meter lcd digital 2
40.19€
20 .99 € 20.99€