Ihr Warenkorb ist leer
Ihr Warenkorb ist leer32 mm flacher Stecknuss, 32 mm, abgeschrägter Stecknuss, 32 mm Stecknuss, flach für Fox 36, 38, 40, Gabelkopfkappe
J. Tye
Bewertet in den USA am24. Februar 2025
Solid, well-made. Useful for Fox 36 to add/remove spacers 👍🏼
Anthony Andersen
Bewertet in den USA am24. Februar 2025
Worked great for my 2019 Fox Float 36 factory forks
Mrdimi
Bewertet in Kanada am 24. Juni 2023
Switched my Pike to coil and the 32mm fit my ACS-3 top cap. Will get used during maintenance and seemed well made all things considered. A bit pricey though.
alex symianick
Bewertet in Kanada am 17. April 2023
Did what it needed to do. Tolerances are not great. The socket was a loose fit on my fox 36 top cap. I was a bit worried it was going to round it out but it didn't and torqued down fine afterwards.If you are servicing your forks often stuck with the park tool set.
Mike
Bewertet in Kanada am 28. April 2023
The size is correct. The problem is that the 32mm nut on the Fox 36 fork is very shallow and has very little room around the edges. Due to the outer thickness of this socket, it hits the crown and does not sit flush on the nut. You might get it to turn, but you'll likely cause damage. I decided to pay the extra couple bucks for the proper tool. Forks aren't cheap.
Produktempfehlungen
30.15€
14 .99 € 14.99€