Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

9 Stück Gaswarnsensormodul MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Sensormodul Gassensor Starter-Kit

Kostenloser Versand ab 25.99€

21.72€

9 .99 9.99€

Auf Lager

Info zu diesem Artikel

  • 【Gasdetektions-Sensormodul】☆☆☆MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Sensormodul Gassensor-Starter-Kit☆☆☆Gas kann verwendet werden in Haus- und Fabrik-Leckageüberwachungsgerät, das für die Erkennung von Gas, Butan, Propan, Methan, Rauch usw. geeignet ist;
  • 【Hohe Leistung】║✔Mit hochwertigem Dual-Panel-Design, mit Betriebsanzeige und TTL-Signalausgabeanweisungen;║✔Das Schaltsignal mit einem DO (TTL)-Ausgang und einem Analogausgang AO;║✔Das gültige TTL-Ausgangssignal ist niedrig. (Low-Level-Signal, wenn das Ausgangslicht direkt an den Mikrocontroller oder das Relaismodul angeschlossen werden kann);║
  • 【Einfache Bedienung】║✔Analoge Ausgangsspannung mit der höheren Konzentration der höheren Spannung;║✔Ein Gas, Erdgas, Stadtgas, Rauch bessere Empfindlichkeit;║✔Es gibt vier Schraubenlöcher für eine einfache Positionierung;║✔Hat eine lange Lebensdauer und zuverlässige Stabilität;║✔Schnelle Reaktions- und Erholungseigenschafte
  • 【Spezifikation】 ║✔Eingangsspannung: DC5V Leistungsaufnahme (Strom): 150mA; ║✔DO-Ausgang: TTL digital 0 und 1 (0,1 und 5V);║ ✔AO-Ausgang: 0,1-0,3 V (relativ zur Verschmutzung), die maximale Konzentration einer Spannung von etwa 4 V;║PINS:✔VCC: positive Stromversorgung (5V);✔GND: Stromversorgung ist negativ; ✔DO: TTL-Schaltsignalausgang; ✔AO: analoger Signalausgang║
  • 【Besonderer Hinweis】☆☆☆ Nachdem der Sensor mit Strom versorgt wurde, muss er sich um 20S aufwärmen, die gemessenen Daten waren stabil, der Wärmesensor ist ein normales Phänomen, da der interne Heizdraht, wenn er heiß ist ist nicht normal☆☆☆.


9pcs Gas Detection Sensor Module MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Sensor Module Gas Sensor Starter Kit

Description:


Gas may be used in homes and factories leakage monitoring device suitable for the detection of gas, butane , propane , methane , smoke , etc. ;

-Using high-quality dual-panel design, with power indicator and TTL signal output instructions;
-The switching signal having a DO (TTL) output and analog output AO ;
-TTL output valid signal is low . ( Low-level signal when the output light can be directly connected to the microcontroller or relay module )
-Analog output voltage with the higher concentration of higher voltage.
-A gas, natural gas, city gas , smoke better sensitivity.
-There are four screw holes for easy positioning ;
-Has a long life and reliable stability
-Rapid response and recovery characteristics


-Input voltage : DC5V Power consumption ( current ): 150mA
-DO output : TTL digital 0 and 1 ( 0.1 and 5V)
-AO output :0.1-0 .3 V ( relative to pollution ) , the maximum concentration of a voltage of about 4V
-Special note: After the sensor is powered , needs to warm up around 20S, measured data was stable , heat sensor is a normal phenomenon , because the internal heating wire , if hot is not normal .


-VCC: positive power supply (5V)
-GND: power supply is negative
-DO: TTL switching signal output
-AO: analog signal output

Packet Contains:
1pc x MQ-2 Sensor
1pc x MQ-3 Sensor
1pc x MQ-4 Sensor
1pc x MQ-5 Sensor
1pc x MQ-6 Sensor
1pc x MQ-7 Sensor
1pc x MQ-8 Sensor
1pc x MQ-9 Sensor
1pc x MQ-135 Sensor


Jorge
Bewertet in Spanien am 27. Mai 2025
Rapidez
Greg
Bewertet in Frankreich am 5. Mai 2024
Bon capteurs,fonctionne parfaitement
R. B.
Bewertet in Deutschland am 9. Dezember 2022
Leider messwerte nicht realistisch, nicht einmal als Schätzeisen zu gebrauchen
Alessandro M.
Bewertet in Italien am 7. März 2022
Attenzione, servono circa 10 minuti prima che il segnale analogico di uscita si stabilizzi. Per il resto sono perfetti.
Produktempfehlungen

10.39€

4 .99 4.99€

5.0
Option wählen