Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDirk
Bewertet in Deutschland am 8. Juli 2024
Scannt sehr gut mit top Reichweite.Wirklich zu empfehlen
RECEP AYYILDIZ
Bewertet in der Türkei am 27. Januar 2024
Ürün çok güzel ve darbelere karşı dayanıklı
Jens M
Bewertet in Deutschland am 19. September 2024
Der Barcode- und QR-Code-Scanner funktioniert, aber die Einrichtung war wirklich sehr mühsam. Obwohl ich auf drei Verbindungsoptionen gehofft hatte (USB, 433-Modus und Bluetooth), funktionierte nur die Bluetooth-Verbindung nach intensivem Studium der englischsprachigen Anleitung. Einmal gekoppelt, muss der Scanner als HID-Tastatur konfiguriert werden, um Daten an den PC zu übertragen. Nach der Konfiguration stellte ich fest, dass der deutsche Zeichensatz separat eingestellt werden muss, damit die übertragenen QR-Codes korrekt sind.Ein großes Problem ist jedoch, dass der Scanner nach einer Zeit der Inaktivität den Kontakt verliert, obwohl er als „verbunden“ angezeigt wird. Nach jedem Timeout muss er neu gekoppelt und konfiguriert werden. Das ist frustrierend, besonders wenn man in der Arbeit auf eine stabile Verbindung angewiesen ist.Ich hoffe es gelingt noch, mit Hilfe des Herstellers, eine stabile USB-Verbindung zu aktivieren, die von Bluetooth unabhängig ist.Was die Lesbarkeit betrifft, funktioniert der rote Laser wirklich sehr gut und schnell bei starken Kontrasten (schwarz auf weiß). Allerdings hat er Probleme mit bunten oder umgekehrten Codes (z.B. weiß auf schwarz), was den Einsatz sehr stark einschränkt.Ein weiterer Kritikpunkt: Die ideale 45°-Aufstellung des Scanners, wie in den Abbildungen gezeigt, ist ohne genaue Anleitung schwer umzusetzen, da die Bedienungsanleitung hierzu keine Informationen gibt. Nach Kontakt mit dem Hersteller erhielt ich ein Video, das zeigt, wie man den Scanner umbaut, was jedoch viel Kraft erfordert.Derzeit vergebe ich 3 Sterne. Sollte ich die Probleme in Zukunft lösen können, werde ich die Bewertung anpassen. Positiv: Die Kopplung mit einem Android-Tablet funktionierte sofort, was jedoch nicht mein Zielsystem war.
Dennis
Bewertet in Deutschland am 16. Mai 2024
Scanner sind gut verarbeitet und wirken qualitativ gut! Strich- und QR-Code werden problemlos erkannt und auch die Bluetooth Verbindung klappt TOP zu IOS oder Android!!!Scanngeschwindigkeit zu Windows sehr träge, kann aber auch an meinem Notebook, bzw Bluetooth-Modul liegen.Nur zu Empfehlen!!!
Afshin Naebkhel
Bewertet in Deutschland am 15. Oktober 2024
Funktioniert genau wie ich es mir dachte. Fühlt sich von der Qualität her auch richtig gut an. Lohnt sich für den Preis.
JB
Bewertet in Deutschland am 1. April 2024
Der Scanner ist sehr solide verarbeitet und liegt gut in der Hand. Er wird sofort am PC als Eingabegerät erkannt. Ich nutz das Gerät mehrere Stunden pro Tag und mir ist noch kein Barcode untergekommen, der nicht beim ersten Versuch zuverlässig erkannt worden wäre. Sehr empfehlenswert
ASDR GmbH
Bewertet in Deutschland am 18. Juni 2023
Das Gerät, kann alle gängigen Barcodes scannen.Was uns leider stört, dass man mit den Scanner recht na an den Barcode muss und die Verarbeitung des Scanners nur aus Plastik besteht. (Nicht robustes)
Jun Wang
Bewertet in Deutschland am 14. Juni 2023
item, looks great, seems like it can take a beating before broken, sturdy, scans fast, scans barcodes in almost all types of packages. Everything was going great, its plug and play, nothing to install, straight forward.Problems started after 1 or 2 hours of use, when the scanner, loses connection, or gets unpaired from the base, i don't really know what happen, but it stops reading barcodes, only beeps, after i reboot, pc, everything goes back to normal for a couple of minutes, but then it all starts to fail again, after half day of work, i unplugged, and i'm going to return it, i ordered another scanner model from this seller, and everything works great so far.
Alexander R Höning
Bewertet in Deutschland am 10. September 2023
Hallo,der Scanner scannt sehr schnell, korrekt und zuverlässig - zumindest beim ersten Testen.Ich kann jedoch den Winkel der Ablageschale NICHT verstellen, so wie es in der BDA mit 45° angegeben ist.Wenn ich noch stärker dran probiere, dann habe ich sicher mehr als ein Teil in der Hand.FRAGE:Gibt es da einen unsichtbaren Entriegelungsknopf oder einen Zauberspruch oder bin ich einfach zu doof?NACHTRAG:man muss sich mit Dingen, die eine miserable Bedienungsanleitung haben wohl länger beschätigen. Man muss die Basis "auseinanderziehen" und raushebeln, neu positioniert einsetzen. Naja, nicht so dolle. Stufenlos wäre besser!Auf manche Dinge muss man erst mal kommen. Schade jetzt gibt es 4 statt 3 Sterne.Leider - heute im Dauerbetrieb - verliert der Scanner immer wieder den Kontakt zu seiner Basis und piept dann 3x kurz. Die Antwort vom Verkäufer ist wohl KI generiert, unbrauchbar. Ich werde morgen erneut testen, ansonsten geht das Teil zurück.
Bursttumajuice
Bewertet in Großbritannien am 3. Februar 2021
Bought 8 of these to use in three warehouses, work spot on, with good range and battery life.Been chucked on the back of fork lift trucks etc. Works with all devices that have bluetooth, just need to select medium/slow input for iOS.
Alfie
Bewertet in Großbritannien am 5. Oktober 2020
Works all the time everytime!A perfect work companion, helps us do stock takes in half the time
Transport Support (A division of GN systems Ltd.)
Bewertet in Großbritannien am 16. September 2019
We purchased one to use with a Samsung Galaxy Tab A6 for stock control barcoding. When connected to the tablet via Bluetooth it acts as a wireless keyboard so the default on-screen keyboard will disappear while it's connected. If you need to use the on-screen keyboard at the same time as the barcode reader (as we do) you can get around it by downloading the free Google Keyboard for Android or iOS. It seems well made for the price and if it did get damaged then not expensive to replace. We will be buying again in the future.
Annabella White
Bewertet in Großbritannien am 13. September 2019
Bought 3 of these for my office, and they were delivered to me quickly. Upon checking the manual, i noticed that the barcodes for adding a suffix to each scan was missing, so I contacted their customer service via email. They are located overseas, so I did not receive a reply until the next day. However, they were extremely helpful and supportive, and resolved my issue within a couple of emails. They provided me a single barcode to scan, which added the entire suffix to the scanners, as opposed to some other models, which requires the scanning of multiple barcodes to achieve the same result. This made programming the 3 guns a breeze, and we have been up and running since.By default, this shows as a USB keyboard and when scanning something will input the text and then hit enter. I found that the instruction booklet had a code to enable serial, which I did. I have my Raspberry Pi reading this via serial using a custom build interface cable and the RXD UART GPIO input. Obviously this is probably not what other people are doing with it but it's pretty robust and not to difficult to convert to a serial reader. I did have problems with the carriage return character while using serial, but luckily there was a code to scan to disable that too! Lots of scannable codes to turn various features on and off.
Produktempfehlungen