Gesenberger
Bewertet in Deutschland am 24. Juni 2024
Mittel- und Endschalldämpfer scheinen auf den ersten Blick in Ordnung, Haltbarkeit kann ich noch nichts zu sagen. Punktabzug gibt es jedoch für die Halterungen. 2 von 3 waren zu lang, musste neue Löcher bohren und von hinten dann umständlich Muttern nutzen. Neue Schrauben waren auch nicht dabei. Ein 4. Halter, der den Mittelschalldämpfer halten soll, war gar nicht bei, muss gesondert gekauft werden.Der Versand erfolgte von allen Teilen lose in einem großen Karton, der schon vom Versanddienstleister an mehreren Stellen dick mit Klebeband geflickt werden musste. Die Schalldämpfer sahen auch entsprechend aus, teilweise stark verkratzt, weil sie gegeneinander scheuerten und auch die ein oder andere Delle. Das Rohr des Mittelschalldämpfers muss man auch noch zuschneiden, da viel zu lang.Ich habe alle Teile abgeschliffen und Thermolack lackiert, jetzt ist die Optik (für den TüV-Prüfer) halbwegs akzeptabel.
Stefan Gastl
Bewertet in Deutschland am 25. Juni 2023
Tut was er soll die Halter passen aber nicht ans Auto habe leider Dienstleister verwenden müssen
Hans-Georg
Bewertet in Deutschland am 10. Februar 2023
Schnelle Lieferung und passgenau wie das Original
Frank Horn
Bewertet in Deutschland am 24. Januar 2022
alles bestens
Jessica R.
Bewertet in Deutschland am 5. Dezember 2021
Great product, but here is what you need to know. First of all, this is for the LWB model, and I had to use my angle grinder and a cutting wheel to remove 15 inches of pipe behind the middle muffler. No big deal if you have the tools. Second, only one of the new style rubber hangers fit, and that was between the middle and rear muffler. The other two for the rear muffler had to be modified with a new hole on one side because they are too wide. Third, this kit does not come with the single bolt hanger that goes right behind the middle muffler, so I ordered that separately. Finally, the coupling sheath that joins the pipes in one section was hard to fit even with dish soap as a lubricant so I used another coupler from Amazon with two built in bolts and it was much easier. Part of my problem was worn out rubber hangers and broken baffling inside my exhaust causing a vibration. Now, the new rubber hangers are super firm and no more vibration. If you do no modify the new rubber hangers and try to use your old ones, you may suffer from too much play in the system as those parts do wear out over time. Overall, quality is good, sound is good, and I am okay with the modifications and missing rubber hanger (not pictured, so not really missing, but that was an important one to replace as it was the most worn out).Update: after 2 months there is quite a bit of rust on both the hangers on each side of the final muffler component.
Merle Schlüter-Korte
Bewertet in Deutschland am 18. Februar 2021
Passt wirklich super, Verarbeitung wirkt ziemlich hochwertig.Einzige Mankos: keine Schrauben zum Befestigen mitgeliefert. Neue Gummi-Auspuffaufhängung lassen sich aufgrund leicht veränderten Aufbaus nicht mit den ursprünglichen Schrauben befestigen