Ihr Warenkorb ist leer
Ihr Warenkorb ist leerFederwegbegrenzer 26mm-38mm pro Stück! Federwegbegrenzern aus Gummi. Verringert das Einfedern der Federn, z.B. bei starker Belastung. Auch für Anhänger oder Wohnwagen geeignet. Nach ca. 10 Minuten Kochen in Wasser wird der Suspensionsbegrenzer in die Quelle gedreht. Bevor Sie Ihre Bestellung aufgeben, beachten Sie bitte folgendes: Stellen Sie das Auto auf einen Wagenheber und achten Sie darauf, dass die Räder frei vom Boden sind. Messen Sie den Abstand zwischen den Federwindungen (etwa die Hälfte der Feder). Jeweils in folgenden Größen erhältlich (Größe = gemessener Abstand zwischen den Federwindungen). Sie müssen 2 Stück pro Achse bestellen: 18mm bis 25mm: GS GE13 26mm bis 38mm: GS GE14 39mm bis 51mm: GS GE15 51mm bis 65mm: GS GE15A
Test.p
Bewertet in Deutschland am 17. April 2025
Der TÜV findet es mit Sicherheit bedenklich aber es macht was es soll.Grade für oldtimer mit schwachen federn optimal.
Dave
Bewertet in Großbritannien am 21. April 2025
Works well and I have use these on various different vehicles over the years. well worth the money and work well to save the shock absorber as well. Well worth the buy considering how much shock absorber are to buy and fit
Maier
Bewertet in Deutschland am 4. Dezember 2024
ich habe 2 stück bestelltLeider war nur eins im packet
giovanni mantegna
Bewertet in Italien am 28. Mai 2023
piccole nonostante le misure prese con attenzione
ziad mellou
Bewertet in Frankreich am 23. Januar 2023
Très difficile à montéCaoutchouc très dure
Ich bin’s...
Bewertet in Deutschland am 10. Juli 2023
Also auf meinen Auto haben die leider nicht gepasst obwohl nach Liste bestellt wurde.
Normann Burzan
Bewertet in Deutschland am 23. August 2021
Passt super und war einfach einzubauen.
Kunde
Bewertet in Deutschland am 4. März 2020
Bin mehr als zufrieden
Luca
Bewertet in Italien am 19. Juli 2020
Le ho montate praticando un foro per fare passare una fascetta e assicurarla sulla molla degli ammortizzatori. Il comportamento della macchina è cambiato. La sento molto sicura ed in generale dà una buona sensazione di guida.
roy
Bewertet in Großbritannien am 25. Oktober 2016
When towing my car was very bouncy when loaded with the kids in the car, so much so my boy was very ill. These things went on within 2 mins each.I first measured the coil gap whilst the car is jacked (make sure you dont compress the springs when jacking, try to find a jacking point on the chassis), in my case it was 36mm gap.When they arrived i boiled the rubber for about 10 mins.I then jack the car up so the springs were slack (wheels also off the road) then used axle stands for safety!!!.I then applied copper slip to both indents so they would go in easy and wouldnt squeak in the future.I then feed them in from one corner - they slid straight in with no problems.Lowered the car back - the car was initially looking like it was sitting high but that as since settled.TOP TIP!!!!These things are just lumps of rubber - i picked up 2 from amazon market place for half the price new. The ones i received were open but unused so it looks like they may have been returned because they are the wrong size. You need to purchase two so this can save a lot if available especially if fulfilled by amazon.
Produktempfehlungen