Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Produktbeschreibung:
1. Maße: 98 x 56 mm.
2. Eingangsspannung: 5 V Gleichstrom.
3. Logikspannung: DC 3,3 V.
4. Bildschirmgröße: 8,9 cm (3,5 Zoll).
5. Auflösung: 480 x 320.
6. Treiber IC für SPI Display: ILI9488
7. Treiber-IC für Touch: NS2009.
T.Perraut
Bewertet in den USA am9. Mai 2024
It’s cheap. It works. Other than that, I regret not going for the 5” hdmi touch screen they sell.Touch is super frustrating as it’s shifted vs the screen. For me with Klipper and a Manta E3EZ board o had to find the offset to set for the touch to fix it.Mind you you need to enter that offset from the CB1 (ssh to it first download a package run a script set some values). If someone pings me here I can go and find the instructions I saved. I got them from Reddit or some 3D printer forum.Out of the box this will be super frustrating.
jmb59
Bewertet in Frankreich am 6. November 2024
un peu petit pour le tactile, ou des tout petit doigts ;)
Jake Rota
Bewertet in den USA am2. August 2024
This pairs right up with the cb1 / btt pi 1.2. "Cheapad" was an amazing resource for this, but I ended up building my own firmware / config from scratch and copied in the tft spi config from the github. The screen has been working flawlessly and I cant be happier with how easy it was to set it up. FPC cable, blue side facing away from screen, and blue side facing away from skr mini v3 - booted right up.
Acedias
Bewertet in den USA am19. März 2024
Works great. At first it was just displaying a blank screen, but i went to the BTT github and found i needed to uncomment the overlays=tft35_spi in the boardenv.txt for it to work with cb1. Now it works great!My only complaint is the packaging. I appreciate BTT includes little rubber ducks with their products, but having it smooshed in the box on top of the screen seems like a bad idea. Luckily the screen wasn’t cracked like some other people experienced. Honestly I’d be fine without the duck on this one.
Scott
Bewertet in den USA am1. Juni 2024
Also works great with the BTT Pi 1.2 - with only one cable to run (a 9-pin 1.0mm pitch FPC ribbon). The included ribbon cable is 300mm which wasn't long enough, so I picked up a 500mm replacement. I also had to update the software on the BTT Pi to the latest version to get the fix for random touch inputs on this screen (minor annoyance). All in all, I recommend it based on the quality, price, and value.
Produktempfehlungen
