CHEECENT Kabelloser Druckserver für USB-Drucker (nicht Plug & Play), 2-Port-USB-Druckserver, Konvertieren Sie kabelgebundenen Drucker in drahtlose WiFi-Ethernet-Netzwerke, kompatibel mit Windows Mac

Ottimo prodotto, ben rifinito! Facile da installare e configurare, con un buon libretto di istruzioni in Italiano ( anche se seguire il video è stato più pratico e veloce, in italiano pure quello ) grazie a questo piccolo print-server sono finalmente riuscito a collegare anche il mio portatile con Linux Mint!!

Die Installation hat mit der zugehörigen Anleitung zwar funktioniert, die Netzwerks-Oberfläche ist allerdings doch eher etwas für Computer Nerds. Drucker war ein Epson WF-3620. Im Netzwerk wurden zur Installation ein Windows 10 PC sowie ein MacBook Pro mit Sequoia 15 verwendet.Grund für den Umtausch war aber nicht die Installation, sondern dass die Port-Verbindung instabil war. Der Printserver hat den im Set-Up programmierten Port 1oder 2 nach kurzer Zeit nicht mehr als aktiv erkannt. Erst nach erneuter Einrichtung funktionierte es wieder. Nach wenigen Tagen trat der Fehler wieder auf, usw.Die Mühe mich hier noch tiefer reinzugraben und die Hotline anzuschreiben ersah ich als unangemessen und entschied mich für den Umtausch.Vielleicht haben andere mehr Glück

Hab es trotz Anleitung nicht zum Laufen bekommen. Die IP Adresse war nicht aufzurufen. Schade

Artigo de acordo a descrição apresentada

Das Teil erfüllte nicht meine Erwartungen deshalb schickte ich das hochwertige Teil zurück.

Reiner Printserver mit sehr schlechter Anleitung. Nun bin ich Fachmann und hatte das Ding recht schnell am Laufen aber leider kam mein Windows Druckauftrag zwar beim Printserver an wurde trotz korrekter IP und Port nicht weiter zum Drucker gereicht. Ich habe den Support über E-Mail angefragt wo man anhand der zwei Screenshots das Problem eindeutig sehen konnte aber leider war die Antwort auf Level 0 Niveau und ich habe das Ding gleich zurück geschickt.

It's working fine & build quality is amazing

Works great, easy set up

This device isn't exactly a straightforward print server. The sellers know this device setup is confusing - they tell you constantly to read and follow the instructions or follow the videos on YouTube. Listen to them and do that. I've been in IT for quite a while and when you get the product, you think you'll know better --- you don't. This device is set up very specifically and you need to follow the instructions even when they seem weird or wrong. I assume the hardware was a firewall or something and was repurposed by Cheecent as a print server. Once you understand that the hardware is sort of universal, it's actually a lot easier. It's got functions, items, routing tables, DHCP server, I assume a firewall in there somewhere, etc that just aren't used for being a print server.Here are the cliff notes.The LAN port is used specifically for configuration. It does nothing else. I'm sure for some other applications that use this hardware LAN is used for a whole bunch of other stuff - in this print server device, it's used for nothing but initial configuration. It's default setting is 192.168.6.1. Connect your laptop using ethernet - I don't believe you need a crossover cable. You'll need to statically assign your computer a IP on the same subnet - 192.168.6.100, for example. This is only a method to configure the print server, once you're done with the configuration step, you'll never need the LAN port again, unless you need to reconfigure something.Configure your WAN port with an internal address on the same subnet as everything else on your network. You do this for the wireless or wired port, one or the other. If your internal gateway ip is 192.168.1.1, set it up to something static that's not used, they recommend 192.168.1.248, but you can do whatever as long as it's not currently in use on your network. Set up your subnet mask etc; DNS shouldn't be needed or the gateway in normal circumstances. Don't use DHCP, as you're going to use this IP as the printer's port, and you don't want it changing. You might want to visit the print server page at this step and turn off the bi-directional printing option on the USB ports. It's recommended in the instructions; I turned it off and never looked back.Hook up your printer to one of the usb ports, plug the power in. Hook up your network cable to WAN if you're using wired, or nothing if you're using wireless. Wait a couple of minutes for it to boot up. For printer installation on the computer, install as normal and use a jet direct port with your WAN IP colon corresponding port number. For example, 192.168.1.248:9100 for USB1 or 192.168.1.248:9101 for USB2.I'm sure you could hack this thing and do a bunch of stuff with it. I'm not sure why or what you would want to do, but it seems the hardware is general purpose. Maybe they could have made set up easier, blocked the lan port with a piece of tape and allowed management from the WAN port; I don't know nor does it matter. Once it's set up, I'm not planning on ever touching it again as long as I don't need to change my wireless name or internal IP address. As a print server, once it's set up it's been rock solid which is by far the most important thing.BTW I'm using this with a Zebra Eltron LP2844 CTP with an mfg date of 2004 and on an iMac. Works great - but wasn't on the compatibility list. If anything changes, I'll update the review, but I'm really happy with this device.