Ihr Warenkorb ist leer
Ihr Warenkorb ist leerPräzise CNC-gefrästes, hochwertiges Walnuss-/Messing-Griffset. Es wird das Erscheinungsbild Ihrer Schusswaffe erheblich verbessern. Unsere Richtlinie ist einfach: Wenn Sie nicht zufrieden sind, waren wir nicht zufrieden. Geben Sie den Artikel innerhalb von 30 Tagen zurück und Sie erhalten Ihr Geld zurück. Versand erfolgt innerhalb von 96 Stunden nach Zahlungseingang von Montag bis Freitag.
Vanessa
Bewertet in Deutschland am 28. Juli 2024
Sieht sehr hübsch aus! Bei meinem hatte er etwas Spiel, wir haben dann Isolierband um den Metallrahmen, dann war das Holz bomben fest.Leider ist das Schuppenmuster etwas empfindlich. Bei mir ist beim montieren schon eine Schuppe abgebrochen. War für mich aber nicht weiter schlimm.Der Griff sieht richtig klasse aus!
Smurf
Bewertet in den USA am13. November 2024
I put it on my 5in 460 S&W x-frame, and it shoots like a dream one handed with the way it allows me to grip it, and that's with a 350 grain mono metal +P+. (2800fps)
Fbks Supergoose
Bewertet in den USA am18. Dezember 2023
First of all these grips look amazing. I took a chance a purchased a set to see what I would get. They are exactly as advertised. Yes, they look very similar to a popular high end grip manufacturer. The wood is beautiful oiled walnut. The grip design fits my hand perfectly and I actually get a better grip/control than the factory soft rubber hogues. I put these on a 6" 500. I have fairly large hands. ... The not so awesome: I had to do quite a bit of fitting to make these grips fit. Out of the box mine did not close together front or back. There was about an 1/8" gap in the back showing the grip frame. The outline of the grip frame inside the panels is perfect and pretty tight. They will not wiggle or move around. I had to remove some material from the inside of each side of the grip panels to bring the two halves together. I have them pretty close now but not perfect and will work on fine tuning them a little bit more. I should have taken lots of pictures before, during and after, but I was eager to get them mounted up because they look so good on a stainless X Frame. I might purchase a second set and add pictures in the future. I do have extensive experience in gun smithing and fitting wood parts. You can ruin the grips very easily if you do not have experience. IF you decide to fit these yourself, you will have to install and remove them several times. They do fit the frame tightly. DO NOT pry the grips apart by putting a screwdriver or knife between the panels. The wood is soft an will damage easily. This may NOT be the "drop-in" set of grips that most are expecting. If you had to pay a gunsmith to make these fit perfectly... you would definitely be at or well above the cost of the name brand grips that seem really expensive. The wood is very nice and look amazing but I am undecided now on trying out a second set or going all in on a set of the high-end real deal grips. Also, I thought these would be straight from Asia, but the packaging and provenance seems to be European...??? I did try to fit these on a N Frame Round Butt and they are a definite no-go, but could be extensively reshaped internally if you were determined to make it work. I will see how they fit on a 460 and a old K Frame RB, I do not have a newer L Frame Round Butt to try out. I will update with any more developments or photos in the future.
Produktempfehlungen
