Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDESCRIPTION This set includes DE-5000 itself TL-21 Alligator Test Lead Case TL-22 SMD ISO 9001 Auto L.C.R. check 100 / 120 / 1k / 10k / 100k Hz test frequency 20,000 / 2,000 counts display Backlit Ls / Lp / Cs / Cp / Rs / Rp / DCR with D / Q / θ / ESR measurement Relative mode Series / Parallel modes Components sorting function *Selectable tolerance ±0.25%, ±0.5%, ±1%, ±2%, ±5%, ±10%, ±20%, -20% +80% Low battery indication Optical IR to USB PC link (USB/CD can send to the PC via USB measurement data.) Main Specifications Infrared communication module (One-touch detachable to DE-5000 body, with lock mechanism) · USB mini-B jack Windows-compatible version: 98, SE/2000/XP, Vista, 7 - All captured data to the PC, can be saved in CSV format together with the measurement date and time information. Output voltage: DC9V - Rated output current: 1A · PSE safety standards obtained from · Input: AC100 ~ 240V 60/50Hz - Polarity: Center plus You can check the English manual this link -5000_manu_en2p.pdf
nv
Bewertet in Deutschland am 4. November 2024
Gutes Messgerät, wenn man es verstanden hat damit umzugehen aber es gipt youtube "deutsche Anleitung", vielen Dank
Christine
Bewertet in Deutschland am 25. Juli 2024
Sehr guter LCR Meter der sich im Bezug Preis/Leistung sehr bewährt hat. Lediglich schade das er nicht von haus aus mit Richtigen Kelvin Clips kommt, die krokodilklemmen mit den kurzen Kabeln sind ein Witz.
Thomas
Bewertet in Deutschland am 15. Juli 2024
Das Messgerät ist unschlagbar günstig und hinreichend genau.
Martin J.
Bewertet in Deutschland am 27. März 2022
bin sowohl mit dem Gerät als auch der Lieferung absolut zufrieden !
Filmfan
Bewertet in Deutschland am 24. August 2021
Nach einigen YouTube Videos, die sich mit dem Gerät beschäftigen, hab ich mir das Gerät auch gekauft.Bisher zwar nur Elkos/Kondensatoren gemessen, aber genau dafür habe ich es gekauft.Vorteil dieses Gerätes ist u.a. die umschaltbare Messfrequenz, d.h. man kann die Bauteile mit der Frequenz messen mit der sie später in der Schaltung betrieben wereden. Möglich sind 100Hz/120Hz (konv. Netzteile/Brückengleichrichtung) sowie 1kHz, 10kHZ und 100kHz (z.B. bei anwendungen in Schaltnetzteilen). In der Hauptanzeige wird der Messwert (pF, nF, µF usw.) angezeigt, auf der 2. Anzeige (oben rechts) kann man einen 2. Wert ablesen. Bei "Netzteilelkos" ist immer der sog. ESR zu prüfen. Ist er erhöht, funktioniert der Elkos nicht mehr in der Netzteilschaltung. Mit diesem Gerät lassen sich solche Fehler (teilwese sogar ohne das Bautei auszulöten) schnell finden.Über Amazon USA wurde das Gerät verkauft und war in weniger als 2 Wochen da, das Set beinhaltete den Krokoklemmenadater und die geschirmte Messpinzette.
RS
Bewertet in den USA am20. März 2021
tl;dr Economical, easy to use and very accurate. The new inventory (March 2021) now ships with an English manual. However the unit does has its flaws.Problem #1: While I don't have any complaints about the device itself there is a major flaw. The 9V battery compartment does not have the traditional polarized connector. This makes it easy to insert the battery incorrectly and blow up the unit. The older models had a reverse sacrificial diode (mixed-signal fast switching SMD diode) across the battery terminal that would blow up if you reversed the battery this protecting the instrument itself. But this diode would bleed a reverse current of approx 2.5-5 uA even when the device was off and was the cause of all low battery life complaints. With the newer models they have removed this diode - allthough the diode place holder continues to be there. This improves the battery life significantly but can permanently damage your device if you accidentally reverse the polarity. I really wish that the manufacturers fix this design flaw. At the very least they can put the conventional 9v battery polarized connectors that prevent battery from being installed incorrectly.Problem #2: The official DC adapter is not readily available. Designed to use 3.5mm x 1.35mm connectors with the barrel length of 12mm with inside pin +ve and outside -ve 9v 650mA which is again unconventional. Official adapter costs an insane $40, which is almost 1/2 the price of what you pay for the device. For $120 DER should not cheap out on providing a generic power supply that would cost no more than $7 on Amazon. Problem #3: Adding a simple protective circuit on the measurement terminals against energelized capacitors will be welcome - although they will have to use extremely low inductance and low capacitance FETs to design that. Something like this will likely cause the cost to go up but nevertheless will be cheap insurance against the chips getting fried.Apart from these nits, the device by itself is absolutely fantastic. I have already used this for several projects it pays for itself. Used it to find bad capacitors and also compared it to measure inductance of several miniature Coilcraft SMD inductors with great accuracy. Having 4 frequencies to run the test against is really very useful. I am still giving this 5-stars.
Oliver M.
Bewertet in Deutschland am 11. Dezember 2021
Leider war die Lieferung unvollständig, sodass das Gerät bei uns nicht eingesetzt werden darf.
Eric Smith
Bewertet in den USA am11. März 2021
I've always wanted an LCR meter, and it used to be that a good one was expensive. A friend recommended this one to me. It works very well. It's fairly easy to use. The provided instruction booklet is not in English, but a PDF of the English language instructions was easy to find with a Google search.You can plug most leaded components directly into the meter, but the included accessories make it easier to use for both leaded and surface-mount components.
Anthony
Bewertet in Mexiko am 10. Juli 2021
Muy bueno y rápida lectura
Jürgen H.
Bewertet in Deutschland am 23. April 2021
Ich nutze es hauptsächlich um als Amateurfunker Spulen zu messen. Sehr genaue und stabile Messwerte zeichnen dieses Gerät aus. Praktisch sind die mitgelieferten Klemmen. So kann man z.B. selbst gewickelte Spulen mit 1nH Auflösung messen (und der angezeigte Wert ist stabil) oder auf SMD Bauteile vermessen. Das Gerät misst natürlich auch Widerstände und Kondensatoren (Auflösung 0,01 pF !) .Für den ernsthaften HF-Techniker ein "MUSS".
Customer
Bewertet in den USA am30. Dezember 2020
I really like the flexibility of this meter, including being able to choose a wide range of stimulus frequencies. I did verify the Capacitance and Resistance measurements to high accuracy standards. The meter correctly indicated the value, within the specified tolerance of the standards (0.05%).Battery life is good. The people who are complaining about the battery getting hot have installed the battery backwards, which is possible. Just look at the markings in the unit carefully.
JRod
Bewertet in den USA am20. Januar 2020
UPDATED: Removed one star for the poor battery life when off. 1.75uA which equates to about 2 weeks before the battery will be dead. So you will need to install a switch somewhere or only use it with an AC adapter (not included).I have quite a few popular high-end Fluke and Brymen hand-held DMMs. I also have a few dedicated capacitance meters that have gotten plenty of good press in the popular blogs. But they all stink at measuring low pF capacitors and actually are kind of terrible at capacitance measurements in most areas. I also have the excellent HP/Agilent/Keysight 34401A but of course it cannot measure capacitance at all (with some other gear you could calculate it).I also have a home-built capacitance meter that spanks the big brands with regard to speed/accuracy/precision but is more of a bench meter.Recently I had the need to test some pF caps and again the only unit that did the job was the home-built so I figured it might be time to go shopping for something more portable and something to verify readings against. Research pointed to this DE-5000 as being a good choice and I agree 1000% with that sentiment.I pulled out some precision capacitors and found the DE-5000 to be shockingly accurate down to single digit pF values and it did agree with my custom bench unit to the last digit in almost every test (for example, a 100pF 0.5pF accuracy cap measured 100.3 on both).You also may know that the test frequency can be significant and this DE-5000 allows you to change that.The only tiny complaint is that it doesn't come with a carrying case, but I slightly forgive that since they may not know what accessories you have and the case would add significant cost mostly due to packaging and shipping/storage.I only briefly tried the other features of the meter and didn't have any thing to note there, although I will say I really only bought this for the capacitor features (LCR/ESR/etc.).Build quality is mid-range, plastic of course.Made in Taiwan.
Produktempfehlungen
