Ihr Warenkorb ist leer
Ihr Warenkorb ist leer DIY 12 V kein Schweißen 4 Saiten 18650 Lithium-Batterie-Managementsystem BMS-Schutzplatine Batteriebox
Technische Punkte:
Kein Schweißdesign.
Hochtemperaturbeständige Batteriebox.
Selbstversichert.
Isolationsschutz
Eine Vielzahl von Schutzplatten kann ausgewählt werden
Spezifikationen.
Spannung: Nennspannung 15 V, 11,6 V nach der Entladung, volle 16,8 V.
Strom: bestimmt durch Batterieleistung.
4s1p / 2p Batteriebox
Größe:110*85*20/45mm
Gewicht:74g/101g
4s30a Schutzplatte
Größe: 156 x 85 x 15 mm.
Gewicht:7 1 Gramm
4s30a / 60a / 90a Schutzplatte
Größe: 192 x 85 x 1 5 mm.
Gewicht:103g / 120g / 137g
4S2P / 4P Batteriegehäuse
Größe: 192 x 85 x 20 / 40 mm.
Gewicht: 126 g / 1 80 g.
Paket einschließlich:
1 x Batteriegehäuse / Leiterplatte
Achtung!
Alle Batterie-Box-Batterieausrichtung zur Leiterplatte.
Produkt ist nur die Leiterplatte oder Batteriebox, enthält keine Batterien.
Peter
Bewertet in Schweden am 8. März 2025
Ja det finns många in och utgångar men vad skall man ha allt till en manual??? Annars inga problem med att montera ihop dessa hur många kan man montera ihop 1eller tio??
Michael Bayliss
Bewertet in Großbritannien am 21. Mai 2024
Battery Management System BMS Protection Board Battery Box (4s4p Long)Delivery was fast, but the packaging was just a bubble-wrap bag. Mine has survived the post but was a bit tattered and squashed.The quality of the board is good. I am now having to source an external BMS to go with this board. I have re-purposed some old laptop 18650 cells to use in this board.Just a heads-up to anybody that is building a 4S4P Battery. This board has connectors for the 18650 cells only. The green screw connectors could be used to wire the 16 volt output, but would be best to take the power from the BMS, so that it can control the “cut-off protection” and the black bms header with supplied ribbon cable to give the equalising voltage to the external BMS board. There are no IC’s or resisters on this board at all. So there needs to be an extra BMS board needed to provide the claimed “charge/discharge protection, discharge current protection, temperature protection, voltage equalization and balance charging”.Claims;“there are 16 batteries on both sides of the board,” This implies that this board can be fitted with 32 cells, however, there are 8 battery holders on either side of the board, to be able to fit a total of 16 cells.“Each board has a 15A fuse,” No. It would be good practice to fit a 15A fuse, but there are none on this board.“Product is only the circuit board or battery box, does not contain batteries” True. Also does not contain charge/discharge protection, discharge current protection, temperature protection, voltage equalization and balance charging.“The circuit boards have charge/discharge protection, discharge current protection, temperature protection, voltage equalization and balance charging” No it doesn’t, there are no IC’s or resisters / fuses on this board at all.
Justin
Bewertet in den USA am24. November 2023
Board worked great. Downfall's. No wiring diagram or any spec sheets what so ever in package. Messaged customer service. They answered to tell me a wiring diagram was in the box. I replied and said no it wasn't sent them a pic and asked if the xt60 was charge side. They told me that there was not an xt 60 on the board. Lol. It says it in listing and is pictured. I wrote this to say, if you are not sure what you are doing don't expect to get service from the seller. I've messaged several times asking simple questions and not once we're They answered. Still a great product and works like it should.
Produktempfehlungen
