Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Vielseitige Anwendung:
Dieser Satz Hahnenfußschlüssel ist ideal für den Einsatz in engen Räumen und schwer zugänglichen Stellen, wodurch Reparaturarbeiten einfacher und effizienter werden. Und sie sind speziell entwickelt, um schwer zugängliche Bördelmuttern an Servolenkungsleitungen, Kraftstoffleitungen, O2-Sensoren, Brems- und Hydraulikleitungen usw. zu erreichen und damit umzugehen.
Krähenfußförmiges Design:
Dieses Krähenfuß-Design ermöglicht es, die Mutter an Ort und Stelle zu halten, ohne zu rutschen oder zu schleifen, wenn Kontakt mit der Mutter hergestellt wird, was den Halt verbessert. In Verbindung mit Ratschen, Verlängerungen und Drehmomentschlüsseln kann es ein hohes Drehmoment anwenden, um große Muttern und Schrauben zu lösen und festzuziehen.
Hochwertiges Material:
Hergestellt aus hochwertigem CR-V-Stahl, mit hoher Härte und starker Verschleißfestigkeit, nicht leicht zu beschädigen. Jeder Hahnenfußschlüssel ist ebenfalls schwarz beschichtet, um Korrosion und Verschleiß zu widerstehen.
Lieferumfang:
21 Stück Schlagmutterschlüssel, erhältlich in 3/8 und 1/2 Zoll Antrieb.
Die 3/8-Zoll-Antriebsgrößen sind 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm und 19 mm.
Die 1/2-Zoll-Antriebsgrößen sind 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 26 mm, 27 mm, 30 mm und 32 mm
Jose Rivera
Bewertet in den USA am25. Februar 2025
Great 👍, tools nice and solid 👌
Farmer G
Bewertet in den USA am2. Februar 2025
It's a great set with a nice case. This set of crow's foot wrenches is invaluable when things are tight and hard to get to. This is a pretty complete metric set with only a few skips at the top of the size range. The finish was perfect on the set that we got. I have the same concerns as others with the size markings being possibly hard to make out after hard and dirty use, but the blow mold case is also marked with sizes, so the infrequent use this will get with us will probably be fine. If a marking wipes off or is covered in grime, it will only fit back into one spot in the case, thus identifying it. I tried fitting them in the next smaller spot, and they will not fit, which may help anyone who cannot read the lightly marked wrenches. This set will be a valuable asset to our set of farm tools.
Jeremy
Bewertet in den USA am1. Januar 2025
Firstly, this is a pretty thorough set of Crowfoot wrenches. So far the sizing and everything seems spot on.I do have some minor critiques/concerns:1. There are some minor (in my mind) finish issues. Areas where you can see that the black coating was applied too thick and started to run or pool.2. There is one where the steel seems to have a small imperfection (rolled edge). This is fairly minor and I don't think it will affect the functionality; however, I wouldn't expect this out of a premium/high dollar set.3. I do have some concerns about the numbering of the wrenches staying visible long term. The size identification is applied with the finish, it is not stamped into the steel. My set won't see heavy usage but I might have concerns if these were getting used heavily by a pro-mechanic.Overall, I'd rate 4 out of 5. For the occasional DIY user this is probably a great set (especially for the price). For the pro-mechanic who needs to use these daily, you might want to spend more money elsewhere.
Michael J Green
Bewertet in den USA am7. Dezember 2024
Came in a blow mold case like it shows. They look good and fit well
james
Bewertet in den USA am30. November 2024
I have not got to use yet but i ordered because this set has all the sizes, it comes in a nice case and it has the 20mm that other sets did not have
Produktempfehlungen
13.11€
6 .99 € 6.99€