Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Spezifikationen:
Material: Aluminiumlegierung.
Farbe: Schwarz/Rot.
Kompatible Lenkergrößen:
25,4 mm/31,8 mm.
J. Falke
Bewertet in Deutschland am 7. Dezember 2024
Wie soll man die Halterung auf einen 31.8mm-Lenker kriegen, wenn die Halterung am Lenker nur auf 29mm öffnet? Ich werde das sicherlich nicht von der Seite auffädeln und Lenkerband, Schaltgriffe etc. entfernen
F.G
Bewertet in Deutschland am 31. Mai 2024
Super
Zientz, Wolf
Bewertet in Deutschland am 20. Mai 2024
Solide Halterung aus gefrästem Alu. Fasst sich gut an und sieht gut aus. Für eine simple Navi – Halterung aber etwas teuer.
Robert P.
Bewertet in den USA am2. August 2024
The product kind of does what it is suppose to but I wish it was longer. Also the screw is installed and tightened from the bottom which makes it more difficult to install and easier to drop out if it gotten lose. The additional ring mad it to small and thats what they are for but I thought they were also to protect the arem from rubbing metal against metal. Anyway, did not suite me or my bike especially for the price.
Space
Bewertet in Deutschland am 11. Juli 2024
Die Verarbeitung ist sehr gut, es wirkt stabil und ist trotzdem leicht. Auch nach einigen Gravel-Fahrten ist es an der Halterung nicht verrutscht. Auch das Reinklicken von unterschiedlichen Wahoo-Geräten ist problemlos möglich. Insgesamt eine 10 von 10.Ich selber habe nur die Halterung genutzt, keine Ahnung was das für andere Plastikteile noch mit ihm Paket waren (die auch auf dem Bild zu sehen sind), dafür habe ich leider keine Nutzen gesehen, es gab auch keine Erklärung dafür, wofür man diese Teile brauch. Deswegen werde ich einen Stern dafür abziehen.
Robin Zlatic
Bewertet in Deutschland am 6. Oktober 2023
Solid and durable mount. Used plastic one before by other manufacturer but this one holds my fat Garmin eTrex very stable. Good looking too. Didn't tried mounting anything below though.
Michele W.
Bewertet in Deutschland am 26. November 2023
Der erste Eindruck ist okay. Mein Wahoo Bolt 2 passt! Das ganze wirkt aber ein bisschen zerbrechlich. Die Lampenhalterung aus Plastik würde ich nicht nutzen.
John Robert Williams
Bewertet in den USA am29. Dezember 2022
I have 4 different bikes I want to move my original Elemnt to, and the new Wahoo brackets for the Roam are too small..I love the outfront placement and this is THE ANSWER. Probably stronger than the original...and the originals are NOT available any more. Perfect solution, fit, etc.
J. E. Grumling
Bewertet in den USA am9. Februar 2020
This is perfect for my needs. It holds the cyclometer and GoPro up and out a few inches from the handlebars so the drops don't show in the frame. All metal so doesn't shake and clamps down tightly. Also the clap itself is a little thinner than the plastic mount my Wahoo Fitness ELEMNT comes with so it takes up slightly less room on the bars. Only minor issue is that because it is all metal, the GoPro mount doesn't clamp down quite as tightly as a the plastic mounts so sometimes the camera tilts up a little bit.
Sr20det
Bewertet in den USA am18. Februar 2020
Just like the more expensive, branded item. This is a quality piece at a small fraction of the cost, especially with the combo Wahoo/GoPro unit that typically sells for over $60.
R. Argue
Bewertet in den USA am13. Dezember 2020
When assembling a new-to-me bike, I needed a mount to either combine the head-unit and headlight, or move the mount to the right side of the stem from the default left of the stock Wahoo mount. This Dymoece seemed to fit the bill and was substantially less expensive and less logo-covered than the K-Edge and Barfly options. So far I'm quite impressed - unlike other reviewers experiences, this seems sturdy enough over the brutally pothole'd surfaces of SoCal. I will report back if it fails.Moving the headlight out front under the head unit is a nice bonus, though I fear I'm going to lose the rubber o-ring thing as compared to a captive velcro strap like the Two Fish Lockblock holder. Maybe I'll experiment with a mashup between the lockblock and gopro mount.Knocking a star from this as it does not have an integrated rubber strip to keep it from destroying the finish of the bars like many similar mounts now do. It'd also be nice if the corners were radiused a little more gently, but that's just a nice-to-have.Edit: 2 months in and this is still going strong, maybe I got a lucky break. I always ride with the head unit and a 120g light mounted below per the pic; have lightly crashed once and ride 'cobbles' and chopped up pavement regularly on 28s.Obligatory bike industry rant: I wish the big vendors like Giant and Trek would move toward native accessory mount points for things like head units and lights (come on; we've had bottle cage mounting bosses for literal decades now and could use the same "technology" for other things that everyone puts on their bikes) to render clamp mounts unnecessary, but this seems like a weirdly persistent anachronism for a market that prides itself on other unnecessary tech advances every year to sell more product. ¯_(ツ)_/¯
Produktempfehlungen
