Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Besonderheiten:
Selbsttest mit automatischer Kalibrierung.
Farbe: Weiß.
Größe: 69 x 91 x 28 m.
Display: 4,6 cm (1,8 Zoll) TFT-Bildschirm, Farbbildschirm.
Diodenbereich: weniger als 4,5 V.
Zener-Diode: Transistorerkennungsbereich: 0,01–4,5 V.
Zener-Diodenerkennungsbereich: 0,01-30 V.
Triac-Bereich: IGT weniger als 6 mA.
Kapazität: 25pF-100mF.
Widerstand:0.01-50MΩ
Induktivität: 0,01 mH-20 H.
Stromspannung: 3,7 V.
Stromversorgung: eingebauter wiederaufladbarer Lithium-Akku.
Im Lieferumfang enthalten:
1 x multifunktionaler TFT-Transistor-Tester.
1 x elektronisches Komponentenset.
1 x Kabel.
3 x Testhaken
JTCamper
Bewertet in Großbritannien am 23. Januar 2025
I tried to measure some zener diodes. The readings were way off.Bit of a toy. Not a suitable for serious work.
Marco
Bewertet in Italien am 14. Februar 2025
Molto utile attenzione a non bruciarlo misurando condensatori elettrolitici bisogna prima scaricarli
CV
Bewertet in Spanien am 9. Juli 2024
Mui bueno
Galinouz
Bewertet in Frankreich am 28. Juni 2024
Cet appareil ne donne pas toujours le bon brochage je suis déçu je vais m'en procurer un autre !!!!
tekki
Bewertet in Deutschland am 4. Juni 2023
It works really great, but has about 10-20% inaccuracy.
Claudia Herz
Bewertet in Deutschland am 31. Mai 2023
Für den aufgerufenen Betrag bekommt man ein brauchbares Werkzeug. Das reicht mir.
W M
Bewertet in Großbritannien am 26. Oktober 2023
Fantastic component tester and lead identification, accuracy....hmmmm OK tested a 47uF cap it said it was 49uF , my dedicated capacitance meter said it was 46.97 uF so it did have a good go. Zenners and diodes and leds worked well as did resistors . Transistors , it won't identify the model but id's type and pinouts and hfe etc , it does FETS TRIACS THYRISTORS etc comes with a cheap led and capacitor to try and prove its working . You don't have to worry about component direction as it sorts that all out for you and displays it graphically. Very clear screen and rechargeable internal battery it uses a zif type socket to hold the component and comes with some short pre made leads with spring test clips , should you be able to test components in circuit ( not advised as surrounding components can affect readings) comes with some spare pins to make your own fly leads too. One other thing it does but not advertised is there is a small IR sensor on the front panel. If you press test then point a remote control at it it tells you all the data codes being transmitted, usefull for testing if its working , but use of that data.... maybe to someone. All round useful bit of test gear to have on the bench , for £18.....bargain. highly recommended
Produktempfehlungen
