Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Produktname: Kamera-Motorrad-Kit mit unsichtbarem Stick
Packliste: Klemme x4, kurzer Arm x1, langer Arm x1, 1/4" Kugelkopf x1
Herausragende Merkmale sind:
1. Stabiles Montagesystem: Die robusten Metallklemmen können fest an den Rohren befestigt werden;
2. Der unsichtbare Stick ist mit einem Drehverschluss speziell für das Motorradfahren konzipiert und ist beim Fahren stabiler als ein gewöhnlicher Stick.
3. Winkel ist einstellbar: Die Halterung ist mit einem Kugelkopf ausgestattet, der Installationswinkel ist flexibel.
4. Die Einzelklemme mit 1/4-Kugelkopf kann zum Radfahren an Lenkern von 17 mm bis 35 mm befestigt werden
Hugo rato
Bewertet in Spanien am 28. Januar 2025
Facilidade de montagem, as engrenagens adaptam-me bem mesmo em chapa no meu caso no avental da vespa. Segurança do produto boa estabilidade. Recomendo
DKH
Bewertet in den USA am7. August 2024
All the good bits firstThe stick itself is well made and a great feature of this stick is the rubberized shaft locks. The rubberized locks are perfect if wearing gloves. Once I have the stick at the length I want, tightening and locking the shaft down is just a twist. Locks are very positive and on rough terrain the shaft will not collapse,Clamps are good quality and lock in on almost every surface without having to worry about movement.This is being used on my SXS with a rear cage and a lot of front-end installation options. and having this set up is a huge jump from any single clamp rig.Now the not-so-good bits,The 1/4-20 screw for the camera is short, I have to really tighten the camera down on the screw post to make me feel like I have the camera secure to the stick. There is a rubber crush washer on the screw post which does a great job in securing the camera I just would have liked to have a couple more threads showing.All of the clamps look unfinished, and there are a few flaws on the metal that have nothing to do with the functionality of the rig just the aesthetics, So instead of hitting these parts with a finish buffer it seems that the answer was to powder coat over the flaws making them stand out even more, it makes the clamps look cheap.And finally. don't use the shaft at full extension (just like any stick getting into the meter(s) range) for two reasons, One the shaft becomes a bit wobbly and it will not lock its best at full extension. Pull a section out all the way and then push it back in an inch or so and lock it in. I found that is the sweet spot for all sections.Bottom line, a great rig, glad that I ordered it and it will and is seeing a lot of use some pretty hard use at that, and it just doesn't care, it just works.
Samara
Bewertet in den USA am27. Oktober 2024
Clamps don't tighten enough
FishinFireman
Bewertet in den USA am17. August 2024
This was a huge fail for me, Its extremely hot here in Texas lately but the pads were coming off the first time I used it and I had to stop every mile to tighten and readjust the arms. The balls would not lock into place and kept moving, at one point my gopro was almost scraping the road. I cant recommend it honestly, its a little cheap.
L
Bewertet in den USA am15. September 2024
It works as should, I guess it's priced fairly, but some parts feel like cheap plastic. So 4 of 5 stars.
Produktempfehlungen
