Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

FS2A 4CH AFHDS 2A kompatibler Empfänger PWM Ausgang für Flysky I6 I6X I6S Sender

Kostenloser Versand ab 25.99€

19.99€

9 .99 9.99€

Auf Lager
  • FS2A 4CH AFHDS 2A Mini Empfänger für Flysky i6 i6X i6S and FS-i6 FS-i6X FS-i6S Sender.
  • Unterstützung: für FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 und andere AFHDS 2A Protokollsender.
  • Frequenzbereich: 2.408-2.475GHZ Bandbreite: 135; Empfängerempfindlichkeit: -92DBM.
  • Entfernung: 400+ Meter; Arbeitsstrom: 20MA; Abmessungen: 11,25MM.
  • Der Empfänger kann normalerweise das Sendesignal empfangen, die Wippe auf den Failsafe-Satz drücken, lange auf die Empfängerbindungstaste drücken, das blaue Licht blinkt schnell mehrere Male und dann immer helle und ausfallsichere Einstellungen sind erfolgreich.


Produktbeschreibungen

Beschreibung:

Artikelname: FS2A 4CH Empfänger

Kanäle: 4CH

Ausgangssignal: PWM

Frequenzbereich: 2.408-2.475GHZ

Bandbreite: 135

Empfängerempfindlichkeit: -92DBM

2.4G Modus: AFHDS 2A

Failfe: Ja

Versorgungsspannung: 3.3-10V

Entfernung: 400+ Meter

Arbeitsstrom: 20MA

Abmessungen: 11 bis 25MM

Gewicht: 0,9 Gramm

Unterstützung: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 und andere AFHDS 2A Protokollsender

Warnhinweise

NO


jcsuperman
Bewertet in den USA am4. Februar 2025
Got these to use with my Radiomaster MT12. The Radiomaster R85C just keeps loosing signal. Contacted Radiomaster and their generic answer is: I'm too close to the RC Truck. NO KIDDING... I'm driving an SCX24 Rock Crawler.. I'm not 30feet away.. I got these by the recommendation of yep... work great. NO dropped signal and I can stand right next to the truck without any issues. Will be buying more when needed that's for sure!!
Sherylin Schroeder
Bewertet in den USA am4. Januar 2025
It's the lightest and smallest of the JR 2.54 mm spacing servo pin, 4 channel receivers for fixed wing RC model used with FlySky's popular line of entry level transmitters like the FS-I6X.
Customer
Bewertet in Kanada am 20. Februar 2025
Not overly hard to solder, but it’s worth the time versus spending a lot more to have it all ready done
John Clark
Bewertet in den USA am23. Januar 2024
This is a nice working four channel receiver. Keep in mind that it does require assembly and soldering. if you don't have experience with soldering in fine places, I wouldn't recommend this. Otherwise, its great and works well, Can be used for simple aircraft and some land based RC vehicles.
RenaissanceMan
Bewertet in Kanada am 1. April 2024
This RX comes with the connectors for standard servo cables.If you can solder them yourself you save about $5 Can. I bought this RX for its small size and use it for controlling a STEM locomotive.It works very well, the only thing you might want to consider is using some shrink tubing to protect the board and to secure the antenna.
Produktempfehlungen

11.40€

5 .99 5.99€

4.3
Option wählen

12.49€

5 .99 5.99€

4.6
Option wählen

18.90€

8 .99 8.99€

4.3
Option wählen