Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Godox X2T-C 2.4G Funksender für Canon Kameras (E-TTL II Autoflash) und Blitz (auch für Kameras mit PC-Sync-Buchse)
Kurzanleitung
Dieser Funk-Blitzauslöser Sender Modell X2T-C kann für Studioblitz, Speedlite und Kameraauslöser verwendet werden. Geeignet für Canon Blitzschuh-montierte DSLR- oder Mirrorless-Serie-Kameras. Mit diesem kabellosen X2T-C Blitzauslöser ist eine Hochgeschwindigkeits-Synchronisation für die meisten Kamerablitze, die TTL unterstützen. Die maximale Synchronisationsgeschwindigkeit kann 1/8000 s erreichen.
Eigenschaften:
✔ Mit eingebauter 2,4 GHz Funkübertragung und 100 m Reichweite.
✔ Kabelloses Gruppierungssystem und 32 Kanäle, um mehrere Blitze gleichzeitig unter Kontrolle zu haben.
✔ Die maximale Synchronisationsgeschwindigkeit kann 1/8000 s erreichen.
✔ Kompatibel mit Canon DSLR oder Mirrorless Kameras mit Blitzschuh (E-TTL Autoflash)
Spezifikationen:
- Modulationsmodus: MSK
- Stromversorgung: 2 x AA-Batterien (nicht im Lieferumfang enthalten).
- Manueller Blitz: unterstützt.
- TTL-Autoflash: TTL
- Belichtungskorrektur (FEC): ± 3 Stufen in 1/3-Schritten.
- Fokusunterstützung: manuell öffnen.
- Synchronisation des zweiten Verschlusses: Unterstützung (Einstellung an der Kamera)
- Übertragungsreichweite (ca. ): ¹100m
- Kanal: 32
- Kabellose ID: 0-99
- Gruppe: 5
- Zoom-Einstellung: Stellen Sie die Brennweite des Blitzes durch den Sender ein.
- LCD Panel: breites LCD Panel, Hintergrundbeleuchtung an/aus
- Maße: ca. 72 x 70 x 58 mm.
- Gewicht: ca. 90 g.
- Zustand: 100% nagelneu
- Mit Typ-C-Terminal unterstützt Firmware-Upgrade (wichtig).
Geeignet für:
Canon DSLR-Kameras.
Lieferumfang:
1 x Godox X2T-C kabelloser Trigger-Sender.
1 x Originalverpackung des Herstellers.
1 x Bedienungsanleitung (evtl. nicht in deutscher
1 x Garantiekarte.
1 x Reinigungstuch von Insstro
William Glasgow Howe
Bewertet in Deutschland am 17. Februar 2025
Nice compact size and very reliable.
W. Plunkett
Bewertet in den USA am17. Mai 2025
Best for control of one or two lights and it’s sleek close to the mount is best in Event situations. I rarely groups a series of lights that needs to be adjust. This one of their extensive products, cheapest prices and best performance.
PRAVEEN KUMAR KOTA
Bewertet in Indien am 10. März 2024
It's Godox Product No Dout Excellent
Rob
Bewertet in Großbritannien am 30. Oktober 2022
Relatively easy to use and value for money.
J. Patterson
Bewertet in den USA am12. Dezember 2019
I'm so glad I replaced one of my XPro triggers with the X2T! Godox took the best of the X1T-C (hot shoe mount, form factor) and all of the features of the XPro and stuffed it into the X2T-C with some additional upgrades.*Hot Shoe Mount*I create Cinematic Team Portraits from time-to-time (1st Photo), which requires me to remotely trigger the camera while using a Godox speedlite to light each individual in the photo (2nd Photo). I do so by attaching a camera trigger to the side of my camera, then placing the trigger in the X2T hot shoe (3rd Photo). Previously, with the XPro, the receiver would be left uncomfortably hanging on the side (4th Photo). Leaving the receiver dangling on the side reduces the life of the attached cord however, having a hot shoe to place the receiver in allows the cord to last longer than before.*Form Factor*This one is more of a personal preference however, I like how the X2T is flat on-top, unlike the XPro. Also, I'm liking the new Lever Lock Foot over the old one (5th Photo). I'm also liking (and getting used to) the control dial underneath the X2T.*Other Upgrades*I'm liking the ability to control the XT2 with my phone via bluetooth, very handy! As a MAC user, I also appreciate how easy it was to update the firmware on my MAC instead of needing to use my old (and very slow) PC to update my other Godox products. In case you're wondering, most of Godox's older products require a PC to update firmware, which is a big deal since Godox does a great job keeping their products compatible with new cameras.*Overall*I wish I got an X2T sooner and I may get another to replace another XPro! Also, no problems with the seller. The X2T arrived quickly with no issues!
RG R US
Bewertet in den USA am1. September 2019
So I can't say enough about this new X2T Trigger. I was an early adopter of the Godox 2.4 capable products, and quite honestly LOVE them, so much that I chose to convert my entire system to them. That being the case, I've always been happy with my X1T trigger, but it had several minor shortcomings.This new trigger seems to have resolved every single one. Things I've seen a direct improvement: the user interface, build quality and mechanics.First user interface: Godox added the group buttons and while I didn't think I really needed that, let me tell you...oh yes! It makes a big difference. It's so easy to adjust now. No clunky fumbling through the groups. LOVE THIS! Next the menu button...oh this may be my fave!!!! I shoot several things in rear curtain sync and trying to find that darn custom function was so annoying. I used to YouTube it every time I needed it. No MORE! Yay! The interface changes are a win!And I'm going to combine build quality and mechanics because they go together. The clicking thumb wheel...major improvement. It's so much more intuitive now. I can adjust without even looking. The buttons for the settings instead of a zillion hidden menus, also a win. And finally this might seem tiny, but even the locking foot is a nice and appreciated feature. These advances in build and mechanics take it up a notch.So in summary, I didn't think I could possibly need a new trigger, I already had 2 X1T. However I have a new student which meant I needed a third trigger and as I can afford it, I would transition all three over. This is a HUGE upgrade for not a huge upgrade price.And the seller was prompt with my questions. I'm quite pleased and will order from Insstro again.
Produktempfehlungen
