Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Gummi-Unterlegscheiben, Ersatzteile für Kitchenaid Kippkopf-Mixer vom Springen/Hüpfen beim Mischen

Kostenloser Versand ab 25.99€

21.61€

10 .99 10.99€

Auf Lager
  • Dichtung für KitchenAid Kippkopf-Mixer, Schnellbefestigung (nicht für KitchenAid-Mini-Mixer-Modelle), kompatibel mit 3,5 Quarts bis 7 Quarts Kitchenaid Standmixer (klassisch, Plus, Ultra, Handwerker oder Profi usw.)
  • Die Gummidichtung sichert die Neigung des Standmixers und verhindert, dass er springt, was hilft, Ihre Maschine vor übermäßigem Klirren und Vibrationen zu schützen.
  • Hergestellt aus hochwertigen Materialien, die ein Kippen verhindern und robust und langlebig sind, für ein reibungsloses und zuverlässiges Mischerlebnis jedes Mal
  • Einfache Installation und Entfernung: Verwenden Sie einfach einen Schlitzschraubendreher, kippen Sie den Wasserhahn nach oben, entfernen Sie die Schrauben und fädeln Sie sie durch, um sicherzustellen, dass das Paddel nur ein wenig hoch vom Boden der Schüssel ist und installieren Sie es wieder
  • Sie erhalten das Kit:Gummiring X2, wenn Sie Fragen zum Produkt haben, zögern Sie nicht, uns zu kontaktieren, wir werden Ihnen den besten Service bieten.


Für KitchenAid Kippmischer (außer Minis) und schützt Ihre Maschine vor übermäßigem Verschleiß und Vibrationen und schützt die Emaille auf dem Rührpaddel vor Absplittern bei Kontakt mit dem Boden der Schüssel. Beseitigt Hüpf- und Knirschgeräusche während des Betriebs, so dass Sie jedes Mal ein reibungsloses und zuverlässiges Mischerlebnis haben.


Grovie Lee Payne
Bewertet in den USA am11. Februar 2025
Works great took the wobble out of the head of my mixer and leveled up the head
Tjitske
Bewertet in den USA am9. September 2024
My Artisan tilt head mixer has always bounced around as it mixes, which is really annoying. Sometimes the head bounced so much it would unlock by itself even. I was a little skeptical that a little rubber washer (essentially) would fix the problem, but it really does work. Absolutely no bouncing at all now! Installation was very easy, just remove the screw, place the washer, and replace the screw. You MUST recalibrate the height of the mixer blade after this since this is the adjustment screw and there is no way you'll get it perfectly adjusted without going through the dime test (Kitchenaid has some videos on how to do this, it isn't hard). I did not need to trim it or do anything special to get it to work, it worked perfectly as-is. Just make sure to calibrate your mixer, it is super important to get that right.
Brandywine
Bewertet in den USA am28. Juli 2024
This does knockoff does not fit the kitchenaid mixer as the original "everdime".You have to trim off the end as it does not fit.Basically used it as a rubber washer.It is also very thick in the head so you have to tighten the screw significantly in order for the head lock mechanism to work, ...which could strip it out.
Bryana Egland
Bewertet in den USA am16. Oktober 2024
I was gifted a Kitchen Aid Mixer for my wedding and in the process of moving the receipt was lost. I wanted to return the mixer because it would not lock into place and it would bounce up and down mixing semi-thick foods and was impossible to use for making dough. Saw this product on tik tok and gave it a shot, definitely one of my favorite purchases! It allowed me to lock the head of the mixer and stopped the violent bouncing when making dough! It is important to know, that when you first try to assemble it, it does not look like it would fit, but it does!
Patio
Bewertet in den USA am10. August 2024
Die Medien konnten nicht geladen werden.
Produktempfehlungen

22.59€

10 .99 10.99€

4.5
Option wählen

20.38€

9 .99 9.99€

4.9
Option wählen