Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Hailege 380W PWM DC Brushless Electric Motor Speed Controller with Hall-Less 6.5-50V

Kostenloser Versand ab 25.99€

20.99€

8 .99 8.99€

Auf Lager
  • 380W 6.5-50V PWM DC Brushless Electric Motor Speed Controller
  • High power 380W DC three-phase high-speed brushless sensorless controller
  • Full SMD process,stable performance,humanized design, interface all adopts terminal blocks.
  • Maximum Power: 380W
  • Working voltage: 6.5-50V; Drive current: Rated 16A, 30A under cooling


Interface:
1.UVW phase line output connected to motor
2.5V GND The motherboard comes with 5V (current does not exceed 100MA)
3.VCC GND main power supply (external DC power supply)
4.SC speed pulse signal output (only leave the interface without technical support)
5.DIR forward and reverse control (can be connected externally)
6.BRAKE brake control (can be connected externally)
7.0-5V PWM speed control signal dual input (the onboard potentiometer can also be used to adjust the speed of the external 0-5V analog PWM duty cycle signal dual input speed control)
Description:
Overcurrent protection: no (need to connect an external fuse)
Locked-rotor protection: Yes (the current will automatically drop after the locked-rotor)
Over-temperature protection: Yes (if the temperature exceeds 100 degrees, the power is reduced by half)
The connection of V/P short contact is that the PWM signal input effectively recognizes the true PMW signal to support the 3.3V system, and the PMW signal needs to be input from the two ports of the terminal (PWM GND)
When the V/P short contact is disconnected, the 0-5V analog signal input is valid (the factory default is disconnected). During analog input, you can use the onboard voltage potentiometer to adjust the speed. If you want to connect 0 -5V analog signal input, you must remove the jumper cap on the board to cut off the potentiometer voltage divider signal, and then input 0-5V analog signal from the two ports of the terminal (0-5 GND), the highest voltage should not exceed 5V
Note:
This drive is a DC Three Phase Brushless control board, the motor needs a hall to work properly, only applicable to electrical angle 120 degrees.
Package included:
1* 380W 6.5-50V PWM DC Brushless Electric Motor Speed Controller


o.p.b
Bewertet in Deutschland am 15. März 2025
Die Medien konnten nicht geladen werden.
Martinek p.
Bewertet in Deutschland am 7. August 2024
Als ersatzkontroler für einen Akku Rasenmäher für einen 3 Phase Motor!
J.
Bewertet in Deutschland am 11. August 2024
Das Produkt funktioniert. Ist allerdings ohne Hall. Der Artikeltext ist irreführend oben !
Rider
Bewertet in Deutschland am 10. November 2023
Funktioniert überraschend gut sogar mit Daumen Gas.
Produktempfehlungen

20.49€

10 .99 10.99€

4.4
Option wählen

91.24€

43 .99 43.99€

4.7
Option wählen

42.10€

19 .99 19.99€

4.4
Option wählen