Ihr Warenkorb ist leer
Ihr Warenkorb ist leer🔹 Hohe Genauigkeit bei mittlerem Druck Das Hansfelds Manometer mit einem Messbereich von 0-160 Bar/Psi ist für präzise Messungen in mitteldruckigen Anwendungen konzipiert. Die flüssige Glycerinfüllung sorgt für stabile und zuverlässige Ablesungen, selbst unter Vibrationen und Temperaturschwankungen.
Frieda
Bewertet in Deutschland am 8. März 2025
👍
Gabriella🤗
Bewertet in Italien am 5. März 2025
Ok
Volker May
Bewertet in Deutschland am 24. Februar 2025
Gute Qualität. Macht was es soll.
Mr David kerfoot.
Bewertet in Großbritannien am 16. Februar 2025
I am using this water gauge for my RO water filter system easy to read and the right pressure scale for my water pressure in my area. Easy to install and of good quality.
Yalcin
Bewertet in Deutschland am 28. Februar 2024
Schnelle Lieferung , Ware wie beschrieben
Jordan Earl-Davies
Bewertet in Großbritannien am 27. Oktober 2024
Leaks fluid after you cut the nipple
Christian
Bewertet in Deutschland am 23. September 2024
Es ist normalerweise Vertikal und nicht horizontal einzubauen aber erstmal läufts. Mal sehen wie lange es halten wird.
Christian
Bewertet in Deutschland am 2. November 2024
Alles dabei was zu Montage gebraucht wird. Die Qualität ist 1a. Vielen Dank!
Tim
Bewertet in Großbritannien am 16. September 2024
Nice replacement for our old pressure guage which was inaccurate and erratic
Mark Chisholm
Bewertet in Großbritannien am 1. Dezember 2023
Most of my life I worked as an marine engineer (CE) on ships, mainly offshore construction ones. And as you can imagine an engineroom is chock full of pressure gauges all over. Literally thousands of them. Of course there are also now thousands of digital pressure readouts as well and they help with remote reading. But, when you really, and I mean really want to know what the pressure is for sure, you can't beat an analogue gauge.To put it in perspective, a saturation dive system on a DSV still uses analogue pressure gauges for systems where men's lives are at risk. Okay, they cost a small fortune and are regularly calibrated but - and I've been in this situation millions of times - when you need to know for sure what a pressure is you turn to the old bourdon type gauge. It might not be 100% accurate at all times but you know for a fact it's reading close and that you have or have not got pressure. A digital gauge can tell far more lies.So, that brings me to this. For a pressure gauge it's cheap as chips. Well made too with a stainless housing and good quality fittings. Ideal for general purpose use and whilst not something you might use on system critical stuff, perfectly useable for most things such as pump outlets.Which, I've used this on. I have a couple of boost pumps in my house with tiny little gauges that are next to useless. I've installed this in the line and now I can see fairly accurately what the pressure is.Overall a good bit of kit.
Produktempfehlungen
