Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Universelles Multitool-Schnellwechselsystem
HEMUNC multitool sägeblätter passen passend für zahlreiche Modelle von oszillierenden Werkzeugen auf dem Markt, wie zum Beispiel:
AEG ; ALDI: (Workzone/TopCraft); ALPHA TOOLS: A180; Bosch PS50-2A/ MX25EC-21/ PMF 180 E/ PMF 190 E/ PMF 10,8 LI/ PMF 250 CES/ GOP 250 CE/ GOP12V-28N; BATAVIA: ZZ 9506/ TD 8501; DREMEL: MM20/ Multi-Max TM 8300-q/ MM40 & MM45 (ADAPER INCLUDED); BLACK & DECKER: MT250KA/ MT300KA/ BD200MTB; CRAFTSMAN: Nextec; Dewalt: DWE315 KT/ DCS355/ DCS356; ERGOTOOLS: Plattfi eld E-119 250 E;
FEIN Multimaster: FMM 250/ SuperCut; Hitachi: CV18DBL/W4; KRAFTRONIC: KT-MT 200; LIDL: Parkside; MAC ALISTER: 2426-22MM12/ MMT 108; Makita: TM3000C/ BTM40/ BTM50/ DTM50Z/ DTM51Z/ TM3010CK; MEISTER BASIC: BTM-250; MASTERCRAFT: BWS 12 C; Metabo; Milwaukee: M18BMT-0/ 2426-22MM12; Powerplus; RIGID: JobMax; Rockwell; Ryobi: R18MT/ RMT 12011 L/ RMT 18011 L/ RMT 1801 M; Skil: Multi-Tasker 147D/ 1400/ 2.0 Amp/ 1470 AA; Topcraft; WESTFALIA TD 8501; Worx: Sonicrafter/ WX678.9/ WX681 Sonicraft F50/ WX693.9/ WX696.9/ WX693
Alle Maschinen mit OIS:
Bosch GOP OIS (Nicht für die neue Starlock-Maschine)
Bosch PMF
Fein MultiMaster (Nicht für die neue Starlock-Maschine FMM 350)
Fein Multitalent
Wurth EMS 10
Wurth EMS 350
Revolutionäre Hartmetall-Technologie
Die revolutionäre Hartmetall-Technologie ermöglicht HEMUNC-Hartmetall Segment-Sägeblatt, schneiden schnell und langlebig.
Größere Arbeitslänge
Ein größerer Durchmesser verlängert die Lebensdauer der Klinge mit mehr Material auf der Klinge, perfekt für den längeren Einsatz und umfangreiche Arbeiten.
Universelles Schnellspannsystem
Universal-Schnellwechsel-Sägeblätter mit zwei Adaptern können an zahlreichen oszillierenden Werkzeugen verwendet werden. C-Adapter für Dremel MM40 / MM45 / MM50 /VC60-01. O Adapter für Bosch MX30 / GOP300SCE / GOP18VEC.
Mehrere Positionen
Sie können Ihr Multitool während des Fugenentfernungsprozesses in verschiedenen Positionen positionieren, um die gesamte Oberfläche Ihrer neuen Klinge zu nutzen.
Manuela Fäth
Bewertet in Deutschland am 8. September 2024
Passt super...Schneidet wie es soll
Pete from Paducah, KY
Bewertet in den USA am28. August 2024
I had read the review stating that one blade would last about 12’. So I took my chances that the 3 would complete the job of removing the grout in my kitchen. Whoever installed it left spacers/levelers above the grout height. These held up very well and I was able to wear them down vs having them break. My finished floor looks fabulous.
Customer
Bewertet in den USA am27. Oktober 2024
Fts dremil tool Cuts old grout easily
BEST DEALS 4 U
Bewertet in den USA am13. Juli 2024
This tool was literally a lifesaver for cleaning up my grout joints in my porcelain tile with 1/16 inch Self leveling spacers. As many people describe with self leveling spacers, when you remove them, the plastic bits that have some mortar around them stay protruding outside of the tile. This grinding disc for the Dremel ate through the plastic and the mortar. It took me a few hours to diligently go through roughly 210 ft² kitchen tile, but this tool literally made the grout joints perfect. The quality is very good, I was able to use only one of the grinder discs. This was definitely worth the money. This is a genuine honest review, I’m very happy with it.
Dave
Bewertet in den USA am6. Juni 2023
Each one worked well for about 12 feet of grout removal, rotating the tool to use the entire edge.
Rowex
Bewertet in Deutschland am 28. Dezember 2023
Sehr nah am Original, würde ich sofort wieder kaufen.
Brigitte
Bewertet in Deutschland am 19. Oktober 2023
Schnelle Lieferung guter Qualität bei akzeptablem Preis- Leistungsverhältnis!
Customer
Bewertet in den USA am7. März 2022
This product wore as well as any other carbide blade I have used. I comments about blades dulling quickly, initial performance drops quickly with any blade, diamond or carbide. Once I hit the 2nd-tier performance if you will, it maintained that performance for many linear feet. I was removing very hard tile basin grout from 1-1/4 inch mosaic.SPECIAL KUDOS TO HEMUNC CUSTOMER SERVICE. After using up 2 blades and discarding them, the 3rd blade broke after less than 5 minutes, bad welds, only one was secure. I contacted Hemunc through Amazon and they emailed me a little more than a day later. They would simply send me a 3 blade replacement, so in effect I got 5 blades for the price of 3. So I got on chat with Amazon and once I worked through to an agent they were able to send me the replacement 3 piece set.I have manufacturing and quality experience, people talk about 5x9's quality (99.999%), but very few processes are sufficiently automated to achieve this, most often you top out at 99.95%, if there are human touches in the process, then 99.5% is typical. At that rate you get 5 rejects for every 1000 pieces, that's 5,000 upset customers for every million pieces produced. You cannot test 1,000,000 pieces so you sample, but sampling is only good if rejects are uniformely distributed throughout the process and that is unlikely, they usually cluster.So for people who like to talk smack about products or how much better one is over the other, have you used the same number of the same blade in the exact same circumstance to truly compare quality? And after that you have to apply what you paid. Manufacturers can improve the process or test and reject more, but you would not want to pay the price for that, so manufacturers produce where they can make a profit and stay in business including customer service costs -- customer service is where it is at.So complain and give 1-star ratings if you wish, I'm happy to pay 1/2 the price for a blade that is truly a universal fit than Dremel, and to use 6 carbide blades for the price of one diamond blade, it's simply a question of what you get paying as little as possible.
Produktempfehlungen