Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Produktgröße: 1 HE, 19 Zoll Breite
Einschließlich:
1 x Hauptplatte
2 x Halteseite
4 x M4 Schrauben
Unsere neuen zerlegten Produkte wurden entwickelt, um die Luft zu reduzieren und stellen Sie sicher, dass unsere Kunden es zu einem vernünftigen Preis erhalten.
Aci
Bewertet in Deutschland am 6. Februar 2025
Die Haltungen reichen zu weit raus, sehr unpraktisch bei kleinen 19 server Racks mit Frontscheibe
Bob H.
Bewertet in den USA am13. Mai 2025
Needed this for the back of a portable rack mount system. Holds the cables that reach to my home studio equipment. Works perfectly.
Andrew
Bewertet in Großbritannien am 19. Juni 2023
You need to attach the rack ears after unboxing so make sure you have a Philips screwdriver handy. Once fitted in the rack, it serves its purpose. Routes cables to the side and keeps things neat and tidy.
Serge Paladino
Bewertet in Deutschland am 13. Januar 2023
Top, man kann die hacken auch biegen, bricht nicht
Chantal
Bewertet in den USA am4. Oktober 2022
We mounted this behind one of the racks at our studio. We have a very high-end PMC 7.1.4 Dolby Atmos room and the speakers are all connected with expensive and exceptionally heavy cables. We worried that the slack would be so heavy that it may break the wire from its connections or, worse, break the Avid/D.A.D. MTRX AD/DA that feeds audio to the monitors.Mounting this on the backside of that rack allowed us to roll up the slack and hang it to take the load off of the connectors. It definitely does the trick. Saved us a lot of worry
FC
Bewertet in Großbritannien am 28. Dezember 2022
D-rings edges are sharp that easy to hurt the fingers and clash with cables.Screw are all revised, all end of screws are towards to the front, even it has shown in the item photos. However, it didn't come with covers, but the item photos have.Not an engineering sense. it should need to find another supplier for bulk order. A little bit disappointed.
Just trying to help =)
Bewertet in den USA am16. Juni 2022
Re-wired a secondary server that needed to be able to be moved if necessary to the other side of the room. Bought a couple packs of these and they did great wall mounted.I realized these should have been bolted to the cage, but I wanted clear access to the back, without a mess of wires hanging there...and this set up worked perfect for me.Side note, 50 lb drywall screws held these tight in place with no issues or tilt from the wire weight.Definitely recommend.
Produktempfehlungen
