Ihr Warenkorb ist leer
Ihr Warenkorb ist leer4 x Anschlussdosenhalterung.
Ross R. Gould
Bewertet in Australien am 8. November 2024
Handy For Outside Security Lights and Cameras.
Sophie
Bewertet in Kanada am 30. August 2024
Good quality junction box.Cast aluminium, all included in the box: gromet, screw, gasket etc…
Frank Gee
Bewertet in Australien am 5. Oktober 2023
Best value I could find
Customer
Bewertet in Großbritannien am 22. Mai 2022
These were perfect for my Reolink cameras, coming in much cheaper than Reolink's own junction box and appeared to be smaller. It took a bit of jiggling round to find a set of holes for my cameras (RLC-410), but I got there in the end.The boxes are solid and fit together very nicely with no gaps. The wall plugs are fairly poor quality, but that can be said of almost all wall plugs I find bundled with wall-mounted items. It's cheap enough to go out and get some better ones, and the screws are perfectly serviceable.I think the rubber plug through which the camera cable is presumably meant to be routed could be improved by having a cut across its radius. The hole is so small that there was no chance of threading the Reolink cables through. That being said with the cameras installed and with a little bit of sealant for extra protection, there's no chance of water ever finding its way through so it's not a problem.
David
Bewertet in Großbritannien am 21. Februar 2022
I bought these to mount my reolink D500 and B500 cameras. I had considered the cheaper plastic boxes and briefly looked at Reolink's own offering which we way over priced at £30! (More than half the cost of the camera!?). These seemed like a good compromise and the TLDR is i'm very happy with them. I've read some reviews that note that they are not compatible with the Reolink D500 dome camera but they had been made to fit, so i was prepared to make some adjustments before buying. The B500 camera fitted without any issues as the camera baseplate holes lined up perfectly with one set of the many (threaded and sealed) hole patterns in the junction box lid. For the D500 dome cameras, I placed the mounting template supplied with the camera on the junction box lid and transferred the widest hole pattern from the junction box lid to the template, then to the camera base plate. Drilling a new hole pattern in the plastic camera base plate was much easier than drilling the aluminium junction box lid (as some have suggested). There's plenty of room inside the junction box to take the POE RJ45 connector and the additional power connector and reset button fitted to the Reolink camera tail. The lid is sealed with a rubber gasket. There are also 'O' rings supplied to seal the screws. Rubber grommets are supplied to seal the cable entry ports. Overall, a great quality, well thought out junction box, which is certainly better engineered that the cameras that i fitted to them (the Reolink D500 base plate is very poorly designed in comparison to these boxes!). Highly recommended.
Produktempfehlungen
11.94€
6 .99 € 6.99€