La funda de silicona de K&F Concept para la GoPro Hero 13 Black ofrece una solución práctica y confiable para proteger tu cámara de acción durante actividades intensas. Su diseño se adapta perfectamente a la cámara, proporcionando protección adicional sin interferir con su funcionalidad. Además, incluye 2 kits de protector de pantalla, lo que garantiza una protección completa para la lente y las pantallas.Material de Silicona Suave y Duradera: Diseñada para resistir golpes y rayones leves sin comprometer la comodidad ni el acceso a los botones.Protección Adicional con Kits de Pantalla: Los protectores incluidos cubren la lente y las pantallas, evitando rayones y daños causados por impactos directos.Diseño Compatible: Ajuste preciso para la GoPro Hero 13 Black, asegurando que todos los puertos y botones estén accesibles.¿Qué tipo de resistencia al golpe tiene?La funda de silicona está diseñada para absorber impactos leves y moderados, como caídas desde alturas reducidas o golpes accidentales. Ofrece una capa de amortiguación que protege contra daños externos, especialmente en las esquinas y bordes. Sin embargo, no es ideal para caídas extremas o golpes severos.¿Es apta para el agua?La funda en sí no es impermeable, pero es resistente a salpicaduras y protege contra la entrada de polvo y partículas. Si utilizas la GoPro en actividades acuáticas, la funda debe combinarse con una carcasa impermeable específica para mantener la cámara segura bajo el agua.¿Qué capacidad de protección tienen los protectores?Los protectores de pantalla incluidos son de vidrio templado y ofrecen una dureza de 9H, lo que significa que son altamente resistentes a rayones provocados por objetos afilados como llaves o arena. También protegen contra impactos leves en las pantallas, garantizando una visibilidad clara y sin distorsiones.La funda de silicona de K&F Concept es una excelente opción para quienes desean proteger su GoPro Hero 13 en actividades diarias y aventuras moderadas. Aunque no es impermeable, combina una resistencia efectiva a golpes leves con la protección adicional de los kits de pantalla.

Great little kit to give your GoPro more protection. Screen protectiors and lens protector are good feeling glass and the case is a soft silicone one that you stretch over the camera to fit. There is a nice little replacement door to make it easier to access the USB-C port without opening it. A bonus is nearly 90% of it will fit on a hero 11/12 as only the front screen protector wont fit as its too big. Great product from KF as always.

I’m giving this set 5-stars for what it is — as nice silicon skeleton that covers the GoPro 13 and provides an extra layer of shock protection, plus 3 full sets of glass covers that protect the lens and the front and rear screens.The screen protectors come with cleaning cloths, a pair of sticky dust removers and sticker strips to help position the glass elements before you press the pieces into place. Just like with a phone screen covers, this takes some prep and care to avoid trapping dust and fingerprints between the glass elements. But the kit comes with everything you need to perform a successful install.The silicon skeleton then slips over the camera. In use (see accompanying video), the cover is not super snug and you can feel it moving around a bit (especially on the right side) on the camera. But it is not floppy and over time you’ll want to remove it for cleaning dust and dirt that gets trapped between the sleeve and the camera. Soaking the sleeve in little water and dish soap, then letting it air dry cleans it right up.My favorite element to this kit is the silicon lens cap that fits on the sleeve (it does fit the lens without the cover). The cap includes a small retainer string, which I set up so the clip can be removed from the camera sleeve so I can quickly take it all the way off the camera so it isn’t flopping around in windy conditions or where you might be frequently switching the orientation of the camera.The kit comes with two items I likely won’t use much. One is the wrist strap. It’s meant to attach to one of the 2 holes in top left corner of the sleeve. Personally, I don’t need a strap and it can just get in the way of the lens, adding one more dangling item to swing into your video at the wrong second. But it’s a decent strap with an adjustable piece to secure it to your wrist, so I may use it elsewhere. It would be prefect for a self-stick or floating attachment.The other item is a replacement battery door that has a hinged rubber opening for a charging cable. This lacks the spring closing mechanism of the factory door and my strong opinion is that it is not waterproof. But it does has have an interior rubber seal and the battery door pushes into place to “seal” closed. Without testing it, I would say that it’s probably sealing out rain or mist, but I would not swim or dive with it. What it does look like a great solution for is when doing night-time time-lapse videos or photography where the camera needs to be hooked up to a battery source. In that use with the OEM door, the door has to be left entirely open and exposed the full battery and memory card compartments. Using this optional door, the battery and memory card remain covered, and only the power cord socket is open. For this use, or if you NEVER film underwater or in heavy rain, and you just want to be able to quickly attach the charge cable, the accessory door should be perfect.

I replaced my existing protective case with this one. The main thing I like about it is that the battery door can be opened without removing the case, so you can swap batteries or access the charging port. It comes with several glass protectors for the lens, front screen and rear screen. I already have those in place, but good to have spares in case they get damaged.

Ho giá comprato materiale della K&F e non mi sono mai dovuto lamentare.In questo caso abbiamo un kit di protezione "soft" per la GoPro 13: due kit di vetri per la protezione di lente, display anteriore e posteriore, un guscio in silicone, il tappo in gomma per la lente (utilizzabile solo se anche il guscio é montato), un paio di cordini e, comodissimo, lo sportellino laterale con apertura ah hoc sul connettore USB-C della videocamera.Per installarlo semplicemente aprite quello originale e sganciate tirando verso l'esterno.PS: personalmente evito a prescidere di portare la videocamera in acqua senza custodia da sub, soprattutto in mare; con la sostituzione dello sportello laterale con quello fornito da K&F avete un motivo in piú, visto che, per quanto comodo, non é waterproof come l'originale (é comunque possibile sostituirlo in tempo zero anche "sul campo")