Ihr Warenkorb ist leer
Ihr Warenkorb ist leerPräzise Anpassungen an Ihre Kreg Bandsäge mit unserem Präzisions-Mikroeinsteller
Sparky John
Bewertet in Australien am 2. September 2024
The fine adjustment actually works although you need to lubricate the knurl wheel contact surface with the frame well otherwise it's hard to turn. I used the lubricant contains ceramic or PTFE which you can easily find in bicycle applications.For a better design, I would see two thrust bearings fitted on both side of the knurl wheel so the fiction with the frame body will be minimised.
R. Sawyer
Bewertet in den USA am26. Februar 2023
Very easy to install and use. I am very impressed with the quality and accuracy of this tool. Band saws can be very hard to dial in and almost impossible to micro adjust. This little gem makes it easy and saves me time!
Gabe Ianzano
Bewertet in Australien am 25. Juni 2021
Great for cutting veneers
Doug & Jean
Bewertet in den USA am8. April 2021
I mounted the Kreg fence on an older Grizzly 14" bandsaw. It worked out so good this old man was having trouble setting the fence where I needed it it moved so smoothly. So I thought this might help and it did. I can move the fence close by hand and make the small adjustments with the micro adjuster. Worked great for building a 4" long cedar bench for a doll house. Some pieces had to be cut to 1.6 mm x 3mm to fit slot in back rest frame. Works very smooth and easy to adjust if the fence is aligned correctly. And the table is waxed regularity.
EuphBC
Bewertet in Kanada am 8. April 2012
I purchased the Kreg router table top, fence and micro adjuster together to go on a home built base. I've used them for about 3 months now and am really happy with my purchase. The router insert is easily levelled in the table top, the mitre track works great with my shop made coping sled, and the 1/4" guide in the track makes feather board adjustments easy. There are a few plastic parts in the fence assembly, but I had no problems with stripping anything in the kit. The fence is solid and stays square to the table once adjusted as long as you aren't too ham fisted with it. I find that having the fence work like a saw fence is a real asset. I'm not constantly adjusting two sides of the fence every time I want to switch things around. The two plastic rods that you insert for the out feed side of the fence work well for jointing stock. There is also a 1/4" track on the fence to hold feather boards or stops. The micro adjuster is a worthwhile purchase (in my opinion anyway) as it makes it really easy to line the fence with bit bearings using a straight edge, or super fine adjustments for depth of cut. It does seem to keep the fence a little more square when it's pulling the fence back rather than pushing it forward. All together, it is a great addition to my shop.
Produktempfehlungen
83.00€
38 .99 € 38.99€
16.64€
7 .99 € 7.99€
92.33€
36 .99 € 36.99€