Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktbeschreibung des Herstellers
Blechknabber
- Handgriff : Tauchisolierter Griff
- Funktions Attribut : Arretierbar
- Material : Spezial Werkzeugstahl
- Saubere Schnittkanten
- Ideal auch für Aluminium, Kupfer und Kunststoff
aBc
Bewertet in Großbritannien am 3. Juni 2024
Here are some photos of the product.I needed a way to cleanly cut a sheet of powder coated 1mm thick steel sheet about 12 inches wide as straight as possible (Door from old Dell tower PC). Using a Dremel or angle grinder would be messy. I then learned about metal nibblers.I did consider a metal nibbler attachment for cordless drill, but I was concerned I would not be able to accurately follow a straight line. Accuracy was more important than speed for my one-off task.I placed a piece of blue masking tape along the line I wished to cut. I then used the hand nibbler upside down to allow the narrow blade to follow the edge of the masking tape. It was hard work cutting through 1mm thick steel sheet. The edges of the sheet was actually folded over making it 2mm thick. I didn't time how long it took me to complete the 12 inch long cut - probably no more than 15 minutes.As I was using the tool upside down, the only minor issue I had was to frequently check where the strip of waste metal was going. Initially, it curled up into a coil less than 1cm diameter and it stopped the nibbler from working after first 2-3 cm.There was no damage to the powder coated paint along the edge of the cut.I examined the serrated blade edge and only the leading tooth is slightly damaged/flattened after completing above task. Apparently you can buy replacement blades costing from a fiver.I'm very pleased with the end results.It is hard work cutting 1mm sheet steel. For much thinner steel sheet, and/or softer metals such as aluminium or copper up to 2mm thick, it may be easier to use.I bought this KStools nibbler because it looked identical to Draper 35748 and Sealey AK327 branded metal nibbler sold in UK and costing more. My KStools nibbler was shipped from Belgium even though I specified Amazon UK as the seller.
PHIL HERLIN
Bewertet in Frankreich am 21. März 2022
grignoteuse de très bonne qualité. jais découper ce fut de 200 litres . pour pouvoir mettre des étagères a l'intérieure. aucune difficulté pour la découpe . je recommande cette article
fp
Bewertet in Italien am 11. November 2022
Fa quello che promette. Taglio senza sbavature. L'ho usato su barattoli di latta da 1mm. Ottimo.
guergilles
Bewertet in Frankreich am 3. Februar 2020
remplace idéalement mon ancienne grignoteuse (20 ans)découpe d'ossature métallique pour plaque de plâtre
Karl Deutsc
Bewertet in Deutschland am 7. Juli 2019
KS Tools 140.2175 Blechknabber,265mm, ist schlecht zu bedinen.d.k.
Massimo
Bewertet in Italien am 29. April 2019
Sostanzialmente svolge il suo compito con dignità. L'ho provata con lamierino sottile, non scorre in modo fluido ma ha funzionato a dovere. Buono il rapporto qualità prezzo
Produktempfehlungen
599.99€
99 .00 € 99.00€