Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Jonathan Crossley
Bewertet in Großbritannien am 7. Januar 2020
Purchasing linear shaft/bearings can be a bit hit and miss at this price point so I was pleasantly surprised when these items arrived and were of good quality. The items arrived on time and well packed.The linear shaft was coated in a light oil film for corrosion protection and supplied bolted to the support rail. The ground finish appeared of good consistent quality, not quite mirror finish but fairly close, measuring each shaft the diameter appears to be approximately 10microns undersize along the length potentially putting them in the h6 tolerance class though possible they could be manufactured to h7 or h8. Only time will tell on how well they last though the base steel appears relatively hard with a case hardening on the ground surface.The bearings themselves were supplied clean and swarf free and are a good close tolerance sliding fit on the shaft - as with this type of linear bearing, bearing noise is quite high.The only slight down side is a bow in the linear shafts but this can be removed by slackening the support rail bolts, clamping to a flat surface and re-tightening.
angelo
Bewertet in Italien am 30. November 2020
qualità prezzo buone
Joan Borrell Manyé
Bewertet in Spanien am 19. Mai 2020
El producto bien, pero te sientes engañado con el precio, tienes que pagar 34,72€ de aduana
caleffi francesco
Bewertet in Italien am 30. Juli 2019
Il pacco è arrivato imballato correttamente. i pezzi sono in ottimo stato, sia le guide che i cuscinetti (che devono essere regolati opportunamente)
Livio Argentini
Bewertet in Italien am 27. August 2019
Bisogna pubblicare piu dati tecnici
Produktempfehlungen