Ihr Warenkorb ist leer
Ihr Warenkorb ist leerEin robustes Werkzeug zum beschädigungsfreien Demontieren und Montieren von Kunststoff-Treibstofftanksicherungsringen von 4 bis 7 1/4 Zoll. Kanalgestaltung auf der Karosserie ermöglicht, die Beine so anzupassen, dass das Werkzeug für eine Vielzahl von Anwendungen geeignet ist, und hält den Antrieb zentriert. Geeignet für die neuen kleineren gezahnten Ringe von GM und herkömmliche Ringe. Das Design ist kompakt, sodass das Werkzeug nicht über dem Arbeitsbereich hängen bleiben und dabei andere Komponenten beschädigen kann.
Rob
Bewertet in Kanada am 2. April 2024
This works well on a 1994 Toyota Supra.
Normand
Bewertet in Mexiko am 25. Juni 2019
Bueno
somo Thokchom
Bewertet in Indien am 23. August 2018
Reputed product from reputed seller.
motoranchan
Bewertet in Japan am 14. Mai 2018
ルノーセニックに使いましたが、ほとんど役に立ちませんでした。力を入れて回そうとすると、固定しているネジが外れてしまいます。汎用が逆に使えなくなってしまっていると思います。
Big-D
Bewertet in den USA am20. September 2012
I do 99% of my own work on all of my vehicles, including replacing a fuel pump when necessary. This wrench is a must-have to work on fuel pump replacement and it will fit on many different type of cars where the fuel pump is located inside the fuel tank. That pump is mounted inside the tank and is covered with a access lid that requires this special tool to get the lid off. Any time you work with a fuel tank, empty of not, extreme care must be taken to avoid a very serious mistake, fire or explosion. Getting the protective lid off is tough and without this special tool, can be very dangerous. I like this tool because its adjustable to fit any make or model so you are not buying some very expensive tools that you may only use once in your life. This wrench adapts to any brand or style of fuel pump lid, making removing it a pretty simple process. Well worth the money I paid, although it was not very much considering how much dealerships charge for a model specific wrench. This wrench works great.Caution: Usually the fuel tank around the location of the fuel pump will have a rubber like coating on it to prevent anything causing a spark. I would suggest not wearing any nylon clothing or shoes that could create a static spark situation. Usually when removing the fuel tank lid, you have removed the rear seat and are in the car directly over the tank. Disconnect the battery also. Once the lid is off, fumes and raw gas are exposed. A simple spark could prove to be catastrophic. Also, it is highly suggested you NOT perform this procedure within your garage. Do so with all doors open and in the open air, this to allow clean air flow and circulation to allow gas fumes to exit the vehicle. And have a Fire Extinguisher close by, or better yet, have someone standing near by with a extinguisher at the ready just in case. Do Not take this procedure lightly, it is probably one of the most potentially dangerous maintenance functions you'll ever perform.
Produktempfehlungen
29.67€
14 .99 € 14.99€
12.90€
5 .99 € 5.99€