Ihr Warenkorb ist leer
Ihr Warenkorb ist leerHD Mini Roll Bar Polsterung 3 'in schwarz bietet die maximale Energieaufnahme & Flamme in Feuer Bremsen wird nicht tropfen oder schmelzen von vielen Sprint WM und Nationwide Serie geeignet für Stangen von 1–1/2 & quot bis 1–3/4 & quot selbstklebend (pre-taped) für eine schnelle und saubere Montage Mini-Füllung hat eine stromlinienförmige, Form zu konzentrieren, wo Sie es benötigen, die Verbesserung sightlines und reduzieren blinden Stellen durch schmalere Bauweise – leichtes Gewicht mit einer sportlichen Aussehen
Edgar
Bewertet in den USA am31. März 2025
2 sticks for Miata nb hard dog
Gerald L Green
Bewertet in den USA am26. Mai 2024
I have a 1970 Pro Street Challenger with a 6 point cage. These fit very cool. The car has not even been out of the shop yet and one side fell off. I will use some stronger glue and reattach.
Cyrus H.
Bewertet in den USA am10. November 2023
The self adhesive came off in two days, and I had to add zip ties so save yourself some time and do that from the beginning so you do not have one fall off and you lose it on the trail. Otherwise that they are good padding. Very stiff though.
sonya
Bewertet in den USA am25. April 2022
This isn’t the pool noodle stuff. High density, high quality roll bar padding. Great for those of us who need the extra space since it only provides protection on one side of the bar.The adhesive is great ONLY for holding pad in place while you secure it with zip ties. One session on track and the heat ruins the adhesive. It won’t stay in place for long unless you secure it some other way, which you should be doing anyway. You really can’t expect the adhesive to hold the pad in place during a collision, and if you think that’s possible, you probably shouldn’t be in a race car to begin with.
Michael S.
Bewertet in den USA am27. April 2018
2 sticks worked perfectly to fully cover the main hoop on a Hard Dog M2 Hard Core Double Diagonal (1.75" tubing) for the Miata, with a little left over on each. I started close to the center of the main hoop with the finished ends, leaving space for a GoPro mount in the middle of the bar, and cut about 12-14 inches from the ends above the seat belt guides. The little cutoffs were perfect to pad the diagonals in the middle, since those also may be helmet contact points. The material cuts easily and cleanly, and curved around the bends well with some gentle heat gun assistance. Some of the adhesive did come off with the backing, but I used big 1/4" wide zip ties, so no worries about it coming up. This is not SFI rated, but is about the same firm material and suits the purpose of proper roll bar padding for track days.
Produktempfehlungen
489.99€
99 .00 € 99.00€