Ihr Warenkorb ist leer
Ihr Warenkorb ist leerJed Rabe
Bewertet in den USA am28. Dezember 2024
This is a neat tool to have as a network engineer. I have used this to help install switches and used it as a desk for my laptop while standing in front of a rack. This is always in my tool bag when doing installations!
RudolfO
Bewertet in Deutschland am 19. Juli 2024
The two in function is useful- helps racking devices up to 50kg as said on package- flipside use it as a laptop stand in the rack you would be configuring devices
René Happel
Bewertet in Deutschland am 1. November 2024
Einfacher Einbau und Handhabung
Benny Bychick
Bewertet in Deutschland am 27. Dezember 2023
Very handy tool, especially with limited manpower for rack and stak
Eike R.
Bewertet in Deutschland am 21. Oktober 2023
Die Patchbox Rackhalter sind nicht nur hochwertig, sondern auch angenehm klein und leicht. Dies macht sie äußerst portabel und leicht zu montieren. Trotz des hohen Preises sind sie eine praktische Ergänzung für die Verkabelung. 4 Sterne aufgrund des Preises, aber 5 Sterne für die Handlichkeit und einfache Montage.
Bram
Überprüft in Belgien am 19. Mai 2023
Super om dit te gebruiken, altijd handen vrij om toestellen correct in rack te monteren.Perfect om laptop op te zetten als deze omgekeerd gemonteerd is waardoor je deze niet meer moet op de grond plaatsen of een plaats zoeken.
RB
Bewertet in den USA am17. Februar 2023
Beautiful and well constructed. Lots of nice touches like magnets that hold it closed.BUTIt does not fit some 10-32 A/V style rack rails. Look at the attached picture. The locking pin has been removed for clarity. The inside curve of the rack rail keeps the Setup.exe2 from going far enough in, and keeps the locking pin from reaching the hole. Disappointing for my applications.
Ben
Bewertet in Großbritannien am 15. Oktober 2023
Used it a few times so far and it’s made every install easy! Let’s a single man struggling to do a two man job alone do the work safely and quickly.No more tying to balance a switch in one hand, hoping the cage nuts don’t pop out whilst bending an a rack ear.Biggest issue, and why it doesn’t get 5 stars: requires some tools (a spanner) to adjust the rack ears and no where to store the alternative pins. They could have easily made a threaded hole on the arms to store the extra pins.
Bud Chasteen
Bewertet in den USA am13. Oktober 2023
Amazing concept, especially the reversible idea to hold a laptop. However the engineering needs more work. Will not fit some thicker rack rails at all, won't slide on. On those it does fit, one side slides in and locks but the 2nd side the angle is off and it will not slide in far enough for the pin to seat. Square holes it works fine but NOT with cage nuts installed. They must be removed at the U where the tool is inserted. And it is over priced vs other similar items.
Produktempfehlungen