Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktbeschreibungen
Beschreibung:
Umweltbedingungen anwenden.
Lagertemperaturbereich: -30 ℃ ~ 80 ℃.
Betriebstemperaturbereich: -15 ℃ ~ 70 ℃.
Betriebsspannungsbereich: 4,8-6,8 V
Mechanische Spezifikationen:
Größe: 40 x 20 x 40 mm.
Gewicht 60g
Übersetzungsverhältnis 342
Lager: Doppellager.
Anschlusskabel: 300 ± 5 mm.
Motor 3-polig
Elektrische Spezifikationen:
Leerlaufstrom (bei gestoppt): ( 4mA @ 5V ) / ( 5mA @ 6,8V )
Betriebsgeschwindigkeit (bei Leerlauf): (0,2 Sek/60 ° @ 5 V) / ( 0,17 Sek/60 ° bei 6,8 V).
Stalldrehmoment (bei verriegelt): (21,5 kg·cm@5 V) / (25 kg·cm@6,8 V).
Stallstrom (bei gesperrt): ( 1,6 A @ 5 V ) / ( 2,5 A @ 6,8 V )
Steuerungsspezifikationen:
Steuerungssystem:PWM (Pulsweitenmodifikation)
Pulsbreitenbereich: 500~2500μsec
Neutralposition 1500μsec
Laufgrad: 180° oder 270° (bei 500~2500μsec)
Totbandbreite 3μsec
Betriebsfrequenz:50-330Hz
Drehrichtung: gegenverriegelnd (wenn 500~2500μsec)
Warnhinweise
NEIN
William J.
Bewertet in den USA am9. Januar 2025
after I put it together it works great. it has lots of parts and NO directions
Client d'
Bewertet in Frankreich am 24. Januar 2025
Bon produit , mais je vous invite à l’acheter sur AliExpress , beaucoup moins cher . Le vendeur nous prend un peu pour des vaches à lait au vue du prix proposé sur ce site
A.A
Bewertet in Kanada am 26. November 2024
Seems very high quality made doesn't seem cheap or delicate. One major flaw I added photos to try and demonstrate, is that the wire comes out of the servo on the side that has the moving bracket. So the mounting bracket is on the opposite side of the wire. The moving bracket side, has the wire, which gets in the way of the moving bracket. However as I tried to show in the photo this is easily solved by pulling the wire down, however, I can see that causing stress on the wire possibly you could damage the wire this way. Also if your motor was to swing to far, as shown, it could pinch the wire between the box of the servo and the moving bracket. Ideally, they could have ran the wire out the mounting side as this is more logical for having the wire out of the way of a moving part, no tension would of been placed on the wire, and depending on what you mount to, you could of drilled a whole into your project and ran the wire down through it avoiding any pinching. Other than that one huge design flaw, it seems very sturdy and good quality material. I'll be returning mine only because of the wire, if your able to over come and over look this, it's a great motor.
N and V ❤️
Bewertet in den USA am20. Dezember 2024
Works great with Arduino projects and is strong enough to pinch fingers, so be careful. The mounting holes make it easy to attach multiple motors together or mount to a larger project. Currently using a few of these motors to create a robotic arm.
Patrick C.
Bewertet in den USA am28. April 2024
I'm glad I finally bought a product that works as described, perfect
Produktempfehlungen
15.99€
7 .99 € 7.99€