Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Vier-Klingen-Design
Vier Rillen für Spanentfernung, schnelleres Bohren und höhere Spanabtragseffizienz.
Selbstschneidende Bohrspitze
mit Gewinde für schnelle und genaue Positionierung
Universal-Sechskant-Griff.
Nicht leicht zu verrutschen, geeignet für elektrische Bohrmaschinen, Tischbohrmaschinen, Akkubohrmaschinen usw.
Anton-Marc Chainey
Bewertet in Großbritannien am 12. März 2025
Good quality
Heinz Thies
Bewertet in Deutschland am 7. November 2024
Super
Elio B.
Bewertet in Deutschland am 4. November 2024
Artikel wie beschrieben und pünktlich geliefert
Grimbo
Bewertet in Deutschland am 30. Oktober 2024
Die Bohrer waren gut verpackt, einzeln im Plastikhüllen und wie beschrieben.
Michael B.
Bewertet in Großbritannien am 28. Dezember 2024
Used on a 100mm square fence post to make clearance holes before bolting post to a vertical wall. Timber wet but not a problem. Watch out for potentially a big kick from the larger bits if they jam so maybe reduce your drill speed. Each bit nicely supplied in it's own plastic case and clearly marked. No sign of blunting after first use unlike some cheaper versions.
E.K.
Bewertet in Großbritannien am 26. Mai 2024
Arrived on time. Did what I wanted which is great, I didn't put them through a tough time but they are sharp and cut well.
horst stern
Bewertet in Deutschland am 23. November 2024
Aktion ok
Kunde
Bewertet in Deutschland am 19. September 2024
Wer zügig Löcher in Holzbalken bohren will ist hier richtig. Zusammen mit einem guten Akkuschrauber machen die Bohrer richtig Spaß.
Markus
Bewertet in Deutschland am 18. September 2024
Einziger Nachteil: die Führungsschraube an der Spitze zieht den Bohrer etwas zu aggresiv in das Holz, so dass dann i.d.R. die Bohrmaschine blockiert. Abhilfe schafft ein kleines vorgebortes Loch. Ansonsten sind die Bohrer gerade und nach zeigen nach mehreren Löchern in Birkenholz keine Abnutzung.
Baz
Bewertet in Großbritannien am 11. August 2024
Very good
Customer
Bewertet in Großbritannien am 18. März 2023
Honestly, these are completely fine for the cost of the set, which was £21.99 when I ordered them. They aren’t the sharpest drill bits in the world but they don't have any rough spots or chips. Right out of the box I was having zero issues with them on general purpose DIY materials.As a quick test I chucked these into both my cordless and pillar drill, neither of which had issues and they chewed through chipboard, pine and pvc without skipping a beat. Sometimes I had to back the drill out a little and clear the chips but besides that these made a surprisingly clean hole. They do cause a fair bit of break out on the backside without a sacrificial piece of material under the workpiece.These feel a lot easier to use in a cordless drill than typical spade bits as the self-tapping tip does a great job of centering and guiding the bit while in use. You just have to keep the drill bit reasonably straight to prevent the workpiece from grabbing onto the bit.I sadly don't have any hardwood on hand to test with these, but I suspect these wont fare too well on the harder stuff over an extended period of time. Maybe occasional and careful use on hardwood won't be problematic but I've seen similarity priced bits snap and bend with the more punishing materials.If you’re looking for a cheap and cheerful set of four flute wood bits that will do an acceptable job with the softer materials and lighter use, these are worth considering. If you’re looking for something able to take the punishment of trade work and frequent enthusiast work then you may want to invest in the big named brand versions instead. At the end of the day this kit of 7 pieces costs the same as one or two of the irwin or armeg branded bits.
Theodor Dick
Bewertet in Deutschland am 16. Oktober 2023
Gerne wieder
Produktempfehlungen