Ihr Warenkorb ist leer
Ihr Warenkorb ist leerMr Chris
Bewertet in Großbritannien am 7. Juni 2023
Before I got this I used tarps making a tent like den I did as a child. It worked, but was a lot of hassle for the smaller jobs that needed blasting as and when.I have only used it briefly at the time of writing this. So I may have to update.It's a pretty stable box, size is great for most things.It does contain most of the mess. But it does seem to leak shot in a few places where you suspected it would. (can see gaps where draft seal does not meet the frame properly, so will probably use some gaffa tape on those. Another reviewer suggested grip fix, but not sure that I want to go there just yet.)Before you start, please ensure all small children are out of earshot. You don't need them hearing the words you will use when putting this together.You will also need: patience of a saint, the common sense the author did not have and available "well-being" space to sit and fume at how rubbish the instructions are.You will also need to straighten the panels. Most people who will buy this won't care or can deal with the few dents, folds and scratches.Typos in the instructions are one thing you can work out what is meant, however they name something in an instruction, yet call it something else in the index. Annoying! But they also rename things. Fastening clamps = jubilee clips, air vent dust collection = hole for vacuum.Where it uses the words "pre-assembled screws" don't think for any time that actually means what it says. It may mean "provided". But you will only find this out once done and note the spares you have left over. The provided screws are labelled differently to how they are described. So you may think it's missing, so use others you have in a tub somewhere, and carry on.Instructions will tell you to fasten something, but won't say where or how on many areas. Nor will it say which way round or facing parts should be. You will pull it apart a few times and redo.There are also bits that are not described. The large hole at the back panel, covered on the inside by metal panel. This is for an industrial vacuum pipe. You will need to remove the rubber seal to make the pipe fit. The one on the left is described as dust vent (for collector) which can also be used for a vacuum and smaller pipe. However, you will need to remove the cover of the one not being used for the vacuum. The vacuum suction is too great, the gloves will go erect and not so easy to use that way. But you will get a taste of being an astronaut on a space walk. Pros and cons I guess.In summary, good bit of kit, shame it has poorly written instructions. What I have written above is my take on it. I am no expert, just someone having a midlife crisis renovating some motorcycles. Someone with greater experience could correct them.Good luck. It is worth it in the end.
mirvaine2000
Bewertet in Spanien am 27. Juli 2023
Producto según descripción. Buena comunicación con el vendedor. Recomendable
cascini stefano
Bewertet in Italien am 23. Oktober 2023
puntuali e corretti
julian
Bewertet in Großbritannien am 19. November 2023
The instructions are not the easiest to follow, which contributed to me taking 4 hrs to erect. However, once built it is fantastic quality. I went around the outside with clear silicone as i wanted to make sure it contained all the dust. You do need a hoover of some sort to keep the viewing glass clear. I changed the way thd viewing glass is installed with wing nuts, so i can easily remove the glass in future. i run a 100ltre compressor and the sifon pole works great. I am 100% satisfied with this product. The light is great, but i have up graded to LED, just my preference but the original is perfectly usuable.
CMWD
Bewertet in Deutschland am 26. Januar 2020
Funktioniert herrvorragend
Elisabeth Karis
Bewertet in Deutschland am 14. Februar 2020
Also der orange Schlauch ist nicht dabei und die Verarbeitung lässt zu wünschen übrig. Wie auf den Fotos ersichtlich, bedarf es in meinem Fall einer Nachbesserung der Abflussklappe. Ich empfehle stark zusätzlich ein Flüssigdichtmittel bei der Montage zu verwenden, wenn man nicht den Boden voller Staub haben möchte. Des Weiteren sind die Blechschrauben, die für die Befestigung der Handschuh-Anschluss-Stutzen mitgeliefert wurden, unbrauchbar. Ansonsten gutes Preis-Leistungsverhältnis
David GUERRERO
Bewertet in Frankreich am 14. August 2020
utilisation pour sablage de pièces mécaniques, seul petit bémol l'étanchéité des joints mais ce n'est pas rédhibitoire.
gitti panda
Bewertet in Deutschland am 5. April 2020
Nun, die Lieferung erfolgte in annehmbarer Zeit aus England.Leider waren einige Teile verbogen & zerkratzt.Zudem das 12V Netzteil nicht für Deutschland oder Österreich zu gebrauchen ist.Und was am meisten ärgerte war, das die Glasscheibe kaputt war.Man sendete wieder eine, und wieder ohne "Achtung Glas" Aufkleber am Karton, somit wieder kaputt (logisch bei einer normalen 4mm Glasscheibe, die im normalen Karton aus England kommt....Nach langen hin und her verhandeln, hab ich mich dann auf eine lächerliche Gutschrift eingelassen, da ich das Teil benötigt hatte.Die Glasscheibe hatte ich dann teuer bei einem Glaser machen lassen.Zudem würde ich empfehlen, viel mehr Licht einzubauen (wir hatten 4 LED Strahler dazu gebaut und auch auf diese eine Schutzfolie geklebt).Die originale Schutzfolien für das Glas die dabei sind, sind viel zu groß, wenn man diese anpassen möchte, schneidet man genau den Kleberand weg....ganz toll....Den Verschluss unten vom Trichter haben wir mit einer Schraube zugemacht, da der Original Verschluss nicht zu gebrauchen ist.Ansonst haben wir auch den Druckluftanschluss auf die andere Seite gebaut, da dieser (inkl. dem zugekauften Druckminderer) bei der Türe stört.Auch haben wir mit 5x5cm Holzstaffeln die wir an die Beine geschraubt haben, um die Kabine anzuheben, da diese für einen 185cm Mann viel zu nieder ist, da bekommt man ansonst Kreuzschmerzen, wenn man da 10 Min. stehen würde.Desweiteren auch ein dicker Gummiplatte an die innere Rückwand geschraubt, da nach 10 Min. strahlen, schon von den Querschlägern der Lack ab war.Ein Flies über die hintere Ansaugöffnung geklebt, damit dort auch kein Staub austritt, und bevor wir die Metallplatte oben (die mit der Glasscheibe) montiert hatten, auch dort eine Dichtung drauf geklebt, da die Abstände durch den Falz zu groß sind, für die original Dichtung.Übrigens, die Schrauben für die Handschuhringe, schmeißt besser weg und nehmt metrische mit selbstsichernden Muttern.mfg
Burgmüller Andrea
Bewertet in Deutschland am 27. September 2019
wurde mit kaputten Sichtfenster geliefert!!War ei irrsinniger Aufwand ein neues Sichtfenster zu bestellen!!Dauerte 14 Tage bis das Sichtfenster an uns verschickt wurde!!
Produktempfehlungen