Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

SATA ST70102AST, Flachrundzange mit Schneidkante 210 mm/8 inch mit rutschfestem TPE Griff und Körper aus Chrom Nickel Stahl für hohe Belastbarkeit

Kostenloser Versand ab 25.99€

15.93€

6 .99 6.99€

Auf Lager

Info zu diesem Artikel

  • Rutschfeste Griffe: Ergonomische Griffe haben eine zweifarbige, rutschfeste Oberfläche für maximalen Komfort und Griffkraft
  • Professionelle Stärke: Körper aus Chrom-Nickel-Stahl bieten die zuverlässige Stärke und Lebensdauer, die Profis brauchen
  • Anti-Rost-Beschichtung: Die klare, Anti-Rost-Beschichtung verlängert die Lebensdauer des Werkzeugs
  • Lasergehärtete Schneidkanten: Die lasergehärteten Schneidkanten sind perfekt für Handwerker oder Elektriker, schneiden präzise und bleiben lange scharf
  • Verzahnte Greifbacken: Für präzises Greifen in engen Bereichen
  • Kombinationswerkzeug: Konzipiert mit zwei Funktionen - eine flache Grifffläche mit feinen Verzahnungen und eine Schneidfläche
  • Schneiden: Schneidkanten zum Schneiden von Drähten bis zu einem Durchmesser von 2,6 mm



Produktbeschreibung des Herstellers

SATA-Ratschen.

Zange

SATA-Schlüssel

Zange

SATA-Ratschen.

Quebrou no primeiro parafuso
Bewertet in Brasilien am 3. Oktober 2024
Tem um bom acabamento
Singularity
Bewertet in Großbritannien am 12. November 2024
The pliers from Sata have just arrived, overall they appear to be good value for money and about the right size that I am after, i.e. not too large. The handles are comfortable and there is no play side to side and they open smoothly. The distance between the jaws are uniform all along and the machining quality is good. There was a tiny amount of bare (sharp edge left from the machining process) but which I made less sharp with a very light rub with a piece of emery cloth. I also recommend wiping it down with a lint free cloth to remove any excess oil coating, if that of course meets with the needs to which it is intended.
Florg
Bewertet in den USA am16. Januar 2023
For the price of only $9, I am very pleased with these 6" Needle Nose Pliers. They appear to be precisely made and exhibit no burrs or physical defects. The jaws align properly and the knurling is consistent and not too shallow. The fit/operation is snug with no perceptible play. The cutting surfaces meet squarely with no gaps. The plastic handles are nice and firm and fit comfortable in the hand.Since I've owned them for only a few weeks, they haven't been subjected to a lot of hard use, but I did cut 10 pieces of .045" rigid steel wire with them and the cutting surfaces exhibit no visible damage.Can't speak regarding how they'll hold up over time, but in my opinion, these appear to fit the bill nicely for general use around the home.
Guillaume Legault
Bewertet in Kanada am 16. April 2022
Avergae quality but the real downside for me was the difficulty to open the pliers. It's not a tool I would use professionally.
Gabryel Suedy Santos de Melo
Bewertet in Brasilien am 12. November 2019
Produto de qualidade
Produktempfehlungen

34.70€

17 .99 17.99€

4.9
Option wählen

14.43€

6 .99 6.99€

4.6
Option wählen

52.06€

22 .99 22.99€

4.5
Option wählen

15.60€

6 .99 6.99€

4.9
Option wählen

20.99€

9 .99 9.99€

4.9
Option wählen

47.57€

21 .99 21.99€

4.6
Option wählen