Ihr Warenkorb ist leer
Ihr Warenkorb ist leerScubapro Din-Umrüstsatz/Universal Din-Umrüstsatz Universal (MK10, MK14, MK16, MK17, MK18, MK20, MK25) Mit diesem Adapter können Sie Ihre erste Stufe bei Bedarf ganz einfach umrüsten, sodass Sie Ihre eigene Ausrüstung statt Leihausrüstung verwenden können! Universal (Messing) ausgenommen MK5-Zubehör für die erste Stufe
Donald Bailey
Bewertet in den USA am27. Mai 2024
The threaded neck does not go down in far enough to seat the rubber O-ring against the regulator inside. I still gave it a five because it’s a great product
Tom
Bewertet in den USA am11. Februar 2024
This one is half or less the cost of others and works well - recommend it to anyone needing to convert to DIN
J. Taber
Bewertet in den USA am15. Mai 2022
I purchased a used Scuba pro Mk17, Din, first stage.Every time I attached it to a tank it would blow the O ring from the first stage. Sometimes it would hold for a while 5 min to 30 minutes then blow. I inspected the first stage and noticed the Din threads did not look very long. I then compared it to another reg. and noticed the connector was longer.The first stage had a 200 bar connector and my tank valves were 300 bar, so the threads were too short.I bought this adapter and solved the problem.I have no clue if it came that way from the manufacturer since I bought it used.
dclangst
Bewertet in den USA am2. Oktober 2020
I installed this on a Mk 20. As long as you can get the yoke nut off of the reg it's an easy install. An allen wrench and some vice grips. If you do a lot of these you can get a special socket that removes yoke nuts from scubatools.com.
Russell Lagore
Bewertet in den USA am10. September 2017
I wanted to swap from a yoke to DIN on my ScubaPro MK10. It fits the MK10 first stage perfectly! Great price for the conversion kit. No directions for installation, but the procedure is fairly straight forward (of course, you should probably take it to a qualified technician). Comes with an extra o-ring not needed for the installation. Probably an extra retaining o-ring.
Produktempfehlungen
160.18€
74 .99 € 74.99€