Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDrehgriffschalter-Set MRX Comp 6 für hinten Micro Front 1:2, Produktabmessungen: 20x10x10cm, Inhalt: 1 Stück
Elvis Bogart
Bewertet in den USA am12. März 2023
SRAM MRX Comp Bicycle 3x6 Twist Shifter Set brought life back to an old bike. The shifters on this old bike were near frozen and the grips were hard as a rock. The shifter kit came with new grips and new cables. I did replace the cable housing for this project at extra cost. This kit integrated well with the existing Shimano Exage Country groupset that was installed on bike. The shifting is not as stiff as other grip shifts I have setup on other bikes. I'm glad I'm still able to keep old bikes going. Thanks SRAM!An addition to this review. I cracked a housing on my original grip shift and replaced the shifters with a new set on my 1998 Specialized Crossroads with a 3x7 set. This package included 2 shifters, cables and SRAM branded grips. MRX shifters are intended for Shimano Derailleurs. This bike has Shimano Acera X derailleurs. These shift much smoother and are less sticky than the old shifters. I replaced the cable housing for my bike with Jag wire branded shifter housing at extra cost. The grips are soft, yet firm, they don’t feel too squishy. To help prevent the ends of grips from ripping, I inserted a nickel in each grip to work as a bar end. They cost 5 cents a piece. A good channel to follow in installing this product is from “Bike Farmer”. As I dig more bikes out of people’s trash and restore them, these shifters are my go to for any pre y2k mountain bikes.
Mr E. Customer
Bewertet in den USA am1. Juli 2023
I'm happy!Fast delivery.Easy mounting, and function well as a direct replacement to original Sram gripshift shifters.
Rene Wittmann
Bewertet in Deutschland am 28. Juni 2022
Die Gangschaltung ist gut und einfach zu verbauen und einzustellen.Allerdings ist es eine Kombination von 3x6, und nicht wie durch die Bilder anzunehmen 3x7!In der Beschreibung ist die Gangzahl auch nicht zu sehen! Deshalb nur 3 Sterne.Wenn die Beschreibung korrekt wäre: 5 Sterne.
Christoph W.
Bewertet in Deutschland am 27. September 2022
Ist dieses Produkt geeignet für Lenkerdurchmesser 22mm ????Leider ist dies nicht ersichtlich in den Produktinfos.
David J. Trevino
Bewertet in den USA am19. Juni 2020
Original shifters were finally starting to fail, and hand grips were pretty worn. These were not the cheapest, but for 18 speed it was the best looking option. After installing and a little dialing in I am totally satisfied. Replacement grips look nice.Pros - Decent build quality, includes cables and gripsCons - Grips are ok, but provide a little less cushion than some. Washers (that go between the shifter and grip, were not included, I reused the old ones). Would be nice if they threw in a couple of cable crimps to complete the install.
M. Frobisher
Bewertet in den USA am23. Mai 2013
These replaced a similar shifter branded Shimano on my crappy old Sears "hybrid" bike that I use for commuting. You'll need an adjustable wrench or set of wrenches and a set of metric hex wrenches.I left the cables full-length and just wrapped the loose ends into a nice loop, thereby not having to dig up those crimp-on cable ends or dragging out the soldering iron to keep the cable ends from fraying. I like the loops, they remind me of in high school when all the cool guys in garage bands would do the same with their electric guitar strings, so the tuning pegs looked a lot like they were in the middle of a razor-wire fence, you know.It took me a couple of tries to figure out the rear shifter, was relaxed 1st or 6th gear? Somehow I muddled through and now my bike has all eighteen speeds back, of which I use the top three.Oh, here's a handy tip. The new grips can be a bear to push onto the handlebar ends. If you have an air compressor, put the air-blower tip (as opposed to filling tires tip or basketballs tip) on it, block the hole in the other end of the handlebar (or grip, if there's one still on) and "inflate" the new grip by blowing compressed air into the small hole in the end of it. That makes it expand and it will slip right on.
Raiyn Storm
Bewertet in den USA am18. Februar 2013
I bought these to update the shifting on my better half's commuter bike. While I'm no fan of twist shifts personally, they did the job admirably until she crashed the bike badly destroying them by smashing and abrading them to death. She has a different model on another bike and those have served her well for better than a decade and I have no doubt that these would have done the same had they survived the crash. When she's ready I'll be purchasing another set as a replacement.UPDATE : New set purchased.
Produktempfehlungen
159.60€
72 .99 € 72.99€