Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

TECNOIOT 5pcs RXB6 433MHz Superheterodyne Wireless Receiver Module

Kostenloser Versand ab 25.99€

12.84€

5 .99 5.99€

Auf Lager
  • 【RXB6】 RXB6 433MHz Superheterodyne Wireless Receiver Module.Applications: Car remote door switch (RKE); Remote control door opener; Wireless security alarm; Remote control curtains; The wireless industrial controller; A wireless data transmission.
  • 【Design compact】 Receiver sensitivity reach -116dBm; Operating frequency: 433.92 MHz; Power supply voltage input range: 3V-5.5V; Low power consumption, 3.3V @ 433.92MHz, 6.0mA.
  • 【Easy operation】 Power Enable mode power can be done at 50nA; Has an analog RSSI signal strength level output; Good selectivity and spurious radiation suppression, and easy through CE / Fcc international certification;
  • 【High performance】 Good local oscillator radiation suppression, multiple receiver modules to work together (ie, more than single income) and will not interfere with each other, used together does not affect the receiving distance.


x5pcs RXB6 433MHz Superheterodyne Wireless Receiver Module

Features:

Receiver sensitivity reach -116dBm;
Operating frequency:433.92 MHz;
Power supply voltage input range: 3V-5.5V;
Low power consumption, 3.3V @ 433.92MHz, 6.0mA
Power Enable mode power consumption can be done lowest 50nA;
Has an analog RSSI signal strength level output;
Good selectivity and spurious radiation suppression, and easy through CE / Fcc international certification;
Good local oscillator radiation suppression, multiple receiver modules to work together (ie, more than single income) and will not interfere with each other, used together does not affect the receiving distance.
Temperature range: -40-85 Centigrade can work even in harsh ambient temperature.
Applications:
Car remote door switch (RKE);
Remote control door opener;
Wireless security alarm;
Remote control curtains;
The wireless industrial controller;
A wireless data transmission.
Packet Contains:

5pcs x RXB6 433MHz Superheterodyne Wireless Receiver Module


Peter Bivesand
Bewertet in Schweden am 14. November 2023
After trying several other RXB6 receivers sold on Amazon I finally found one that work properly.Reception is ok if you use an external antenna of correct length (approx 16.5 cm if you use a simple solid wire connected to ANT-pin).The reception is improved if you connect a wire of the same length to the GND-pin next to the ANT-pin and the wire is 180 degrees opposite the antenna wire. This makes a simple dipole.To minimize noise from the SBC you're using (Pi, Arduino, ESP, etc.) you can use decoupling capacitors in parallell between VCC and GND on the module. Place the capacitors as close as possible to the RXB6 module.I use the following values:100 nF ceramic (closest to the module)0.47uF (electrolytic)10 uF (electrolytic)Pay attention to the polarity of the electrolytic capacitors!To sum it up;This module work ok for 433 Mhz projects. I've not tested how long range you can squeeze out of this module since I'm using it for home automation stuff, but placed indoors I can receive sporadic data from sensors placed up to 200m away and reliably from sensors placed 30m away (through several walls).
Produktempfehlungen

175.67€

74 .99 74.99€

4.5
Option wählen

19.99€

9 .99 9.99€

4.9
Option wählen

43.60€

18 .99 18.99€

4.5
Option wählen

22.75€

9 .99 9.99€

4.6
Option wählen