Ich habe diese Filterringe für meinen DJI Ronin 4D bestellt. Ich bin leider ein wenig enttäuscht, dass man sie nicht einzeln bestellen kann, sondern nur im Set, was es zu einer sehr teuren Angelegenheit macht. Man braucht ja auch nicht alle Größen, sondern meistens nur zwei oder drei. Bitte Tilta verkauft die Dinger einzeln !!!

Fiyat performans müko

bu fiyata ikinci elde bile bulamazsınız Türkiye'de. işini harika yapıyor.

Bought this used, excellent follow focus, small and sturdy. Very easy to set up. Compact and light, does the job very well and has a start and stop focus position you can adjust (both of them) so you can set your start and end points (macro to infinity focus) so you can manually focus whilst looking at the monitor, and you will feel the stopper each time, so you know where to stop turning the wheel. The adjustable elastic hard rubber tape you put on the lens so it turns, it's also made of good quality and easy to install and adjust.

Justo lo que me hacia falta

objet sérieux et de qualité, je suis satisfait de cet achat. Boîte robuste pour la conservation et le transport en tournage... Rien à redire pour le moment.

Die Medien konnten nicht geladen werden.

FF - perfekt, smooth in den Bewegungen, top verarbeitet, schönes Hardcase-Etiu inkl. nötigem Werkzeug und Rod-Verlängerung. Volle Punktzahl und top Preis-Leistungs-Verhältnis

Super Teil. klein, gute Qualität. Hätte es gerne behalten aber bekomme keinen runden V-ND davor bei 82mm Durchmesser Objektiven. Der 82mm Adapterring hat auch keine inneres Gewinde wie die kleineren Adapter.Hätte ich kleinere Objektivdurchmesser, die einen V-ND in der Mattbox zuließen, wäre es ein super Teil. Der 4x5.6 Filterhalter vorne macht in dieser Position nur bedingt Sinn. Hab jetzt das SmallRig gekauft und mir einen Klemmring selbst gebastelt, da die Adapterringe alle kein Innengewinde haben. So passt aber mein V-ND in die Mattbox.

Praktischer kleiner Follow Focus, super Verarbeitung. Auch die einseitige Halterung mit dem Arretierstift sitzt bei meinen Smallrig Cage für die S5 gut. Leider gibt es nur ein Ritzel, und die Friktion läßt sich nicht einstellen, aber das ist Meckern auf hohem Niveau. Wer einen kleinen leichten Follow Focus sucht, bekommt hier was wirklich gutes zu einem erstaunlich günstigen Preis.

I've been a photographer for a good few years and many of my lenses are manual and not 82mm filter thread so these adapters are pretty useful especially the 52, 55 and 58mm. With m43 lenses they tend to have a 46mm filter thread so you still need to step up.If you have the Tilta mini matte box, then you soon discover that 4" by 5.65" filters are very expensive. 1 ND filter is likely going to cost way more than the cost of the Matte Box, On the plus side if you are using say the 58mm you can screw filters in front or behind the rings. With the smaller front elements of these smaller lenses there is room to get your fingers to them from the front. Circular polarisers and variable ND filters are a problem on the back of the ring as if the matte box is just attached ny the ring they tend to rotate behind just from the weight of the Mattebox.If you are just using the ring to mount to the lens then its not too bad, also beware of lenses with a rotating front element. Also zoom lenses may move the front element in or out. Manual primes should be ok. Using a cheap speed booster tended to put a blue circle into the middle of the image. It does give a more vintage feel to the video if you want film like, not video like.As well as fixing to the lens by a ring you can mount with a 15mm rod and this is where you find the key difference between Tilta Cages and Smallrig cages. Tilta provide mounting holes on the front of their cages and Small rig put mount holes on the sides So you will probably need to buy a mounting bracket of some sort for a small rig cage. if you want to attach a 15mm rod to it.I may as well finish with the tilta manual follow focus it just doesn't seem to work at 90 degrees and tends to sit at the 10 O'Clock position. Maybe a larger gear is needed for these smaller lenses.5 stars was for the smaller lens ring adapters, It really would be 4.5 the one small niggle they come in 5 near identical boxes with a foam cut out for each ring, could they not have put the size on the box. Hopefully some of these issues will be useful to know ahead of time, even with these little niggles, there is nothing to compare in this price range to be honest and you will be buying these anyway. If you haven't bought a cage yet, you might want to look at tilta rather than small rig.A Hack for Cokin P filters because the lens adapter rings are threaded it may be possible to build up with step up rings to attach a Cokin filter adapter and then use the smaller Cokin P filters (about 95mm x 84mm x 2mm) compared with the proper filter size 101.6mm 143.5mm (4" by 5.65"). An alternative which works is to use the Cokin square hood and the three filter adapter with the hood on you can slide in one filter, i used two plastic strips in the filter holder groove of the matte box to retain this. Obviously there will be a limit on how wide a lens this will work with but if you have the filters already. I haven't found a commercial adapter plate but it shouldn't be too hard to 3d print an adapter if you have the resources.

An sich super verarbeitet, allerdings ist der Preis schon unverschämt.

I have been looking for a mattbox for a while but didn't want anything too big, I purchased this after reviewing it online and if you are looking for something light weight and sturdy that can easily be used on a gimbal or hand held then this is for you.