Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

TopTes PT-830S Wiederaufladbarer Gasmelder mit 36,8cm Sonde, Bereich 0-10000 ppm, TFT-Farbdisplay mit 3 Alarmtypen, Hohe Empfindlichkeit gaslecksuchgerät für Propan, Methan für Haushalt oder Industrie

Kostenloser Versand ab 25.99€

89.99€

39 .99 39.99€

Auf Lager

Info zu diesem Artikel

  • Hohe Präzision mit flexiblem Sondenschlauch: Der PT-830S Gasmelder nutzt einen Figaro-Sensor zur präzisen Messung von Gasen im Bereich von 0 bis 10.000 ppm. Der 36,8 cm lange Schwanenhals erreicht schwer zugängliche Stellen. Mit anpassbaren Alarmgrenzwerten können Sie die Einstellungen auf Ihre Bedürfnisse abstimmen und Methan, Propan, Butan sowie andere brennbare Gase professionell und genau erkennen
  • Drei Alarmmodi: Der PT-830S Erdgasdetektor verfügt über einen 90 dB lauten Summer, Warnleuchten und eine Vibrationswarnung. Jeder dieser Modi kann unabhängig voneinander nach Ihren Bedürfnissen aktiviert oder deaktiviert werden. Zusätzlich verfügt der Detektor über eine Schnell-Stummschaltung, um die akustischen Alarme beim Detektieren sofort stumm zu schalten und störenden Lärm zu vermeiden
  • Großes TFT-Farbdisplay: Mit einem großen TFT-Farbdisplay bietet der PT-830S Gasmelder eine einfache Ablesung. Er zeigt den PPM-Wert in Echtzeit, den Tonmodus, die Empfindlichkeitsstufen, den Batteriestatus und mehr an. Unterschiedliche Informationen werden durch verschiedene Farben dargestellt, sodass Benutzer Daten schnell identifizieren und verstehen können, selbst bei schlechten Lichtverhältnissen
  • Multifunktional & Professionell: Das Menü des PT-830S Gasmelders umfasst Nullkalibrierung, Nullunterdrückungsfunktion, detaillierte Datenspeicherung der Betriebsprozesse, Anpassung der hohen und niedrigen Empfindlichkeit und mehr. Diese Funktionen gewährleisten präzise Messungen und eine umfassende Protokollierung, was ihn zu einem zuverlässigen Partner für die Aufrechterhaltung einer sicheren Umgebung macht
  • Benutzerfreundliches & langlebiges Design: Der PT-830S bietet einstellbare Bildschirmhelligkeit, automatisches Abschalten und eine integrierte Taschenlampe. Dank USB-C-Ladefunktion hält die Batterie bis zu 8 Stunden. Der PT-830S ist robust, explosionsgeschützt und staubdicht, ideal für anspruchsvolle Umgebungen. Im Lieferumfang enthalten: PT-830S-Gasdetektor, Ladekabel, Aufbewahrungsbox und Benutzerhandbuch


Einführung des PT-830S Gasmelders. Dieses fortschrittliche professionelle Gerät wurde entwickelt, um präzise und zuverlässige Gasdetektion zu bieten, ausgestattet mit einem hochsensiblen Figaro-Sensor mit einem Erfassungsbereich von 0 bis 10.000 ppm.
Der PT-830S ist mit einem intelligenten System ausgestattet und verfügt über ein TFT-Farbdisplay, das klare und leicht ablesbare Daten liefert. Er unterstützt drei Arten von Warnungen (akustisch, visuell und Vibration) und umfasst Datenaufzeichnungsfunktionen, anpassbare Alarmschwellen, Nullpunktkalibrierung und mehr.
Dieses Gerät verfügt über einen praktischen USB-C-Ladeanschluss und eine robuste 2000mAh Lithiumbatterie, die 8 Stunden Betrieb gewährleistet. Sein 35,6 cm flexibler Schwanenhals-Sensor ermöglicht den Zugang zu schwer erreichbaren Bereichen und erhöht seine Vielseitigkeit in verschiedenen industriellen Umgebungen.
Hergestellt aus hochfestem Industriestahl ist der PT-830S wasserdicht, staubdicht und explosionsgeschützt, was ihn ideal für den Einsatz in der Erdöl-, Chemie-, Umweltschutz-, Metallurgie- und Erdgasübertragungsindustrie macht.
Sensor: Gasempfindlicher Halbleiter (GSS)
Alarmmodus: Akustische, visuelle und Vibrationsalarme
Akustischer Alarm: 90 dB Ticken. Der Alarm wird schneller, je höher die Konzentration ist.
Visueller Alarm:
1. Echtzeit-PPM-Diagramm
2.Kurvendiagramm
3. Signallichter
*Bereich: 0%LEL-20%LEL (0ppm-10.000ppm)
Anzeigeabweichung: ±5%FS
Betriebsfeuchtigkeit: Lagertemperatur: Betriebs- & Lagertemperatur: 14~131℉ (-10~55°C)
Abmessungen (ohne Hals): 6,34" x 2,72" x 1,22" (161 x 69 x 31 mm)
Abmessungen (einschließlich Hals): 20,9" x 2,72" x 1,22" (531 x 69 x 31 mm)
Gewicht: 9,06 oz (257 g)
Batterie: 2000mAh 3,7V wiederaufladbarer Lithium-Akku.
Betriebszeit ≥ 8 Stunden
Ladezeit 3-4 Stunden für eine volle Ladung
Was Sie erhalten: PT-830S Gasdetektor, 1 Ladekabel, 1 Aufbewahrungsbox und 1 Benutzerhandbuch
Hinweis: Bitte lassen Sie vor dem Betrieb 25 Sekunden für die Kalibrierung, um eine ordnungsgemäße Funktion zu gewährleisten.


Mark Manson
Bewertet in den USA am9. Februar 2025
Amazing meter! Can’t say enough good things! Extremely sensitive and spot on. I’ve fixed 2 gas leaks with it. Don’t waste your time with Menards, or home depot cheap ines- they are junk! Trust me- been there.
Horst B.
Bewertet in Deutschland am 8. Januar 2025
Hat auf Anhieb geklappt mit Einrichtung.Gute verständliche Anzeige im Display.
joe
Bewertet in Großbritannien am 7. Januar 2025
This is one of those gadgets that you are not sure when you'll use it, but weirdly I found a use pretty soon after getting it.My Dad's new caravan (New to him) had a problem with the gas fridge staying lit. I ordered and fitted a new thermocouple and used the detector to ensure there were no gas leaks after my installation works.The unit comes in a protective case and has a fairly long sensor head that was really useful getting into tight spaces..It does take a while to boot up when switched on, but once ready, it's easy to test by giving it a little sniff of an unlit gas ring. Always prove devices like this are working properly before every use.Don't know when I'll use it again, but for sure it'll get some use.
Herb
Bewertet in den USA am11. Februar 2025
Worked REALLY well at detecting even the smallest amounts of gas. Used it to triple check my connections to our gas stove and double check all of my gas pipes in the basement. It detected gas where I hooked up the gas line and then I noticed I did it wrong, so it basically saved me. Highly recommend this product if you are doing anything with gas.
Inspector Jim
Bewertet in Kanada am 27. Dezember 2024
Read the instruction manual thoroughly for safe and efficient use. It sensitive and accurate and I highly recommended it.
MFH Strange
Bewertet in Kanada am 22. November 2024
We have a gas fireplace in the basement, and for the life me, I have thought I could - at times - smell gas, natural gas. We even had a young guy come over, who stated the unit was fine. But that faint smell still seemed to linger. I finally turned off the gas supply going to the unit, to simply by-pass everything at and in the fireplace.This device by TopTes has just confirmed what I have suspected all along - a very small gas leak.The PT-830S - the actual model number - is a solid, well thought out tester. The exterior is a some kind of heavy-duty plastic or it may have a coating on it, but the unit provides some "grip" on your hands. The shape has waist to the design, which results in a device that is easy to hold onto.The lack of replaceable batteries is a personal preference. With built-in batteries, you do need to keep them charged but you generally don't need to worry about batteries leaking inside. This unit charges up quickly and has the USB-C charging port at a simple location at the bottom front.The screen provides a lot of information - so much so, that you need to navigate to different screens to take advantage of all the information that this unit can give you. It even has "history" that will store on-board, including time, date and what the event was. Remarkable!The sensor head is at the end of a somewhat short 5/8" flexible cable, about 13" long. The sensor its self adds about one more inch to the total length. As this sensor and cable adds front weight to the meter, I found it rather difficult to move around. Yes, the design is excellent and the sensor at the end of an extension cable is a great, but it does sacrifice balance in your hand. I was able to completely eliminate this issue by putting a loop into the extension cable. Now the sensor is only about 3.5" in front of the meter and just a bit higher. This makes the centre point of balance about mid-screen on the meter - a vast improvement and far less tiring during testing.The alerts include an audio alarm, a whole unit vibration and a visual flashing of built-in LED lights around the meter.There are two different scales where you can see the gas in the air. The meter will tell you the kind of gas, and the concentration with numbers and/or graphs. As the meter moved through and then away from the gas, I noticed the meter responded quickly, both in detection mode and also in recovery mode. The meter would was responding quickly as the gas concentration changed.Bottom Line - I feel confident calling this a professional unit. Rugged, full featured and easy to use controls. Also comes with a three year warranty - to me, that shows Toptes's commitment to quality. Even comes with an excellent case, big enough to hold the meter, charging cable and user manual.
Produktempfehlungen