Alles top

These are quality pages and will likely be the ones I stick with when I buy more. They are a bit pricey, which is not great, but they are worth it if you wanna protect your cards better. As others were saying, they are a little bigger in size so that is something to be aware of. From what I can tell, the larger size stems deck. The hole area, as they are a little wider than most card pages, which is good because it keeps the card away from the ring better. I use a d-ring zipping binder and it fit but got close to the zipper when closing.

Ich habe die Seiten als Ersatz für die ursprünglich Mitgelieferten des Binders gekauft.Die Qualität ist wirklich Klasse.Die Öffnung für die Karten ist seitlich und bieten genügend Platz für gesleevte Karten.Im Bild sind die VaultX Seiten zu sehen, oben drüber die ursprüngliche Seite.

Sayfalar gerçekten kaliteli. Aynı firmanın ürünleri ile mükemmel uyumlu.

Schöne, robuste und stabile Seiten. Sehen besser aus als die durchsichtigen Hüllen und sind gepolstert.Ein Stern Abzug, da nur 48 statt 50 Hüllen in dem Paket waren. Ist mir aufgefallen, weil ich 1:1 meine Karten in die neuen Hüllen umgepackt habe. Gibt es hierfür eine Ersatzlieferung oder Erstattung?

Great quality, really recommend getting these over others. You won't regret spending a lil more on them~ 😊

Super QualitätSuper Verkaufsabwicklung

macht was es soll und ist sehr gut verarbeitet. Abmaße stimmen und Karten halten

Zoals verwacht goede kwaliteit.

Thanks to Vault-x I can continue storing cards that are sleeved in the oversized FFG grey sleeves or in Ultra Pro penny sleeves.I store cards from Arkham LCG, LOTR LCG, and magic the gathering in an UP penny sleeves and then in a “Sideloader - 9-Pocket (doubled sided 18) A4 Trading Card Binder Page”. For Arkham LCG I put 2 player cards in a UG penny sleeve and the investigators I put in an FFG grey sleeve and then in a binder page. For LOTR LCG I put three player cards in a UP penny sleeve and the hero’s in a FFG sleeve, then these go in a binder page. For MTG all rares and mythics are sleeved with a tight-fit UP sleeve and then stored in a penny sleeve in a binder pocket.Storing cards in a penny sleeve and then in a pocket of a binder page keeps the card in the pocket because the penny sleeves keep the cards from sliding partly out.Until now (end of 2021/early 2022) I was using Ultimate Guard 18 pocket side loading pages for this. Then Ultimate guard (probably somewhere 2020/2021) decided to shorten their pages by almost 1 cm. After that size change the UG pages no longer fit Ultra Pro Penny or FFG grey sleeves.Why UG would shorten their pages by almost 1 cm beats me. It is inconsistent, it also looks ugly having a mix of two sizes pages in a binder, not to mention that this also means that when you stand your binders up straight, the weight of the pages is on the longer binder pages because those stick out at the bottom about 0.5 cm and I assume there is a risk of the cards in the bottom row of the pages folding a bit. Bottom line to change the size of a succesful product to me sounds like a pretty stupid move from UG.Note that even cards in Dragon shields sleeves no longer fit easily in the new sized UG pages, in particular in the middle row of the new UG pages, which is the smallest of the three rows.I included a picture with a Vault-x page on the bottom, old size UG purple page in the middle and new size UG page on top. The difference between the new and old UG page is almost 1 cm. The old UG purple page is (almost) exactly the same size as the Vault X page.Last year when I found out that UG had changed the size of their 18 pocket pages because I bought a new batch with the smalle size. I returned all of them and I went looking for alternatives. First I tried the Gamegenic 18 pocket pages, thinking since this is the brand that replaced the original FFG sleeves their pages would fit FFG sleeves. But the Gamegenic pages were also smaller then the original UG binder pages. This is probably because the gamegenic Gray sleeves that replaced FFG grey sleeves are also shorter (about 2-3 mms) then the original FFG grey sleeves.Then I searched for information “which side loading binder pocket pages would fit FFG grey sleeves”. I found, based on stories of others that ran into the same joke from UG, that Dragon Shield and Ultra Pro pages didn’t fit UP penny sleeves either (weird that UP pages don’t fit their own UP penny sleeves).I also noticed that most brands do not include the exact size of the pages or the pocket size in their product descriptions. What use to me is the size of the box they come in, to me ? Really annoying having to go buy, try and return a product.Luckily I also found the Vault-X pages based on this search. The Vault-X pages are almost exactly the same size as the original UG pages. The Vault-X pages do fit FFG grey and UP penny sleeves in all three rows with a little wiggle room.If at all I was to have one comment about the Vault-X pages is that they should make all three rows exactly the same height. The bottom row is the largest and the middle row the shortest. The difference is a bit over 1 mm and the middle row is the tightest fit as a result. So for consistency purposes Vault-X should really consider moving about 0.5 mm from the bottom to the middle row. But regardless of that all three rows do today fit FFG grey sleeves and UP penny sleeves.The Vault-X 50 pages packs each came in a plastic bag inside an Amazon paper envelope. I ordered four 50 page packs and received for separate packages from Amazon (in one same delivery moment). Weird but maybe this is cheaper because it didn’t have to come in a box ?I am in the Netherlands but ordered from Amazon.co.Uk because the Vault X pages where not available locally and amazon.de or amazon.fr either didn’t have them or they were not in stock.Durability I don’t know yet but they feel and look and feel good.Value for money is good. Cost wise the Vault-X pages were better then the UG ones. I bought 4 packs of 50 pages for roughly £68 and £5 delivery (roughly 88 Euro). This was including VAT and not sure why but I did not have to pay any additional import fees (which would still have been fine ).Sturdiness is good, they have a similar sturdiness as the old UG pages.

Made very well and perfect fit for my Garbage Pail Kids stickers collection :)

Die Sideloaders von Vault X bestechen durch optimale Handhabung und gute Verarbeitung. Die Karten (egal ob ohne Folie/ in Perfekt-Fit-Folie oder Standard-Folie) halten perfekt an Ort und Stelle und können ohne viel Aufwand entnommen und eingeschoben werden. Auch beim umblättern verrutschen sie nicht und dank dem System die Karten seitlich einzuschieben, können auch keine Karten am oberen Ende der Mappe herausrutschen falls diese gekippt wird. Es passen in jedes Fach ca. 6-8 Karten. Nach meiner Erfahrung würde ich jedoch dazu raten maximal 4 Karten pro Fach (also insgesamt 8 vorne und hinten) einzuordnen.Mit einem Preis von ca. 45 Cent pro Seite sind die Sideloaders von Vault X zwar etwas teurer als herkömmliche Seiten aus Kunststoff, durch die hochwerte Verarbeitung und das tolle System Karten seitlich ohne viel Aufwand einzuschieben und entnehmen zu können, stellen sie jedoch ein durchwegs überzeugendes Ordnungssystem für sämtliche Sammelkarten dar. Das Preis-Leistung-Verhältnis ist auf jeden Fall ausgezeichnet.

Da ich vor kurzem auf der Suche nach Sideloadern war, traf ich relativ schnell auf die Variante von VaultX.Vor einiger Zeit habe ich mir schon die VaultX Premium Heftmappe geholt von der ich sehr begeistert war!Aus diesem Grunde hab ich mich schnell dazu entschlossen, die Sideloader zu kaufen.Positiv ist mir die Qualität der Seiten ins Auge gefallen. Diese fühlen sich wertig an, halten gut im Ordner und lassen es natürlich zu, Sammelkarten samt Hülle hineinzustecken.Dank der seitlichen Einschübe (daher der Name "Sideloader") fallen die Karten (zumindest bei mir mit Hülle) nicht aus den Seiten heraus.Alles in allem würde ich dieses Produkt gerne erneut kaufen, wenn sich meine Sammlung vergrößert! Danke!