Ihr Warenkorb ist leer
Ihr Warenkorb ist leer VEVOR 907 kg 149 cm Palettengabeln einstellbar
Eigenschaften
907 kg Kapazität
Mithilfe unserer Palettengabeln mit großen Gewichtskapazität können Sie schwere Gegenstände mühlelos bewegen. Ideal für alle Ihre schweren Hebeanforderungen.
Langlebiges Material & Design
Unsere Palettengabeln bestehen aus robusten Materialien und einem verbesserten Design, das eine erhöhte Bolzenstärke, eine erweiterte Greiffläche und eine sichere Befestigung umfasst. Upgrade von Einzelschraube auf Doppelschraube, zusätzliche Gewinde an der Schnittstelle und vierfache Verstärkung.
Multi-Schutz für Sicherheit
Hochfeste Bolzen der Güteklasse 8.8, gelbe Pfeilfarbe, rutschfeste Dichtungen und Begrenzungseisen. Multi-Schutz, um Ihre Sicherheit sicherzustellen, robustes Design für maximale Stabilität während des Gebrauchs.
Passend für jede Eimergröße
Spezifikationen
Artikelmodellnummer: HC60-2000T
Produktabmessungen: 1490 x 70 x 230 mm (58,7 x 2,8 x 9 Zoll)
Schaufellippe oben: 180 mm (7 Zoll)
Rechteckrohr (Schaufellippe oben): 50 x 70 x t3,5 mm (2 x 2,8 x 0,14 t Zoll)
Löffel Lippe unten: 280 mm (11 Zoll)
Rechteckrohr (Löffel Lippe unten): 50 x 70 x t3,5 mm (2 x 2,8 x 0,14 t Zoll)
Schaufellippenabstand: 75 mm (3 Zoll)
Rechteckrohr (Schaufellippenabstand): 50 x 70 x t3,5 mm (2 x 2,8 x 0,14 t Zoll)
Einstellbare Stabilisatorstange: 495-915 mm (19,5 - 36 Zoll)
Rohrgröße: 30 x 30 mm (1,2 x 1,2 Zoll)
Außenrohrgröße: 40 x 40 mm (1,6 x 1,6 Zoll)
Nettogewicht: 29,3 kg ± 2 %
Zubehör: 1x Handbuch
Kapazität: 907 kg (2000 lbs)
Gabellänge: L1 x H1 = 1090 x 50 mm (43 x 2 Zoll)
Paket Inhalt
1 x Palettengabel
1 x Handbuch
Jlarson
Bewertet in den USA am1. Januar 2025
We purchased these for our medium duty farm tractor in order to load a truck. They are sturdy and easy to assemble and unassembled. We keep them standing in the corner of a small building while not in use so they don't get weathered and rusty. Adjustable t-bolt on the cross bar immediately broke so I replaced that with a 14mm bolt. Just remember that these extend off your existing bucket so you lose a lot of lift strength. Our tractor that can usually pick up 1500lbs at 6' got cut back to 988lbs at same height due to the load being so far out. Still works for me though. It'll pick up a round bale with no problem. Better than a spear.
Catnar
Bewertet in den USA am31. Mai 2024
My husband wanted these to help move some things around outside. He actually connected his to an old tractor bucket so he doesn’t have to take them off and put back on since he’s got 2. Made it easy to move a small storage container, and especially great for gathering up tree limbs after a storm. Very reasonably priced and sturdy. An inexpensive option to make your tractor have pallet forks.
Ignacio R.
Bewertet in Spanien am 3. Dezember 2024
Aún no las probé con cargas pesadas pero aparentemente parece que van a cumplir con mis necesidades (cargar al máximo 400 kg)
Texas Bill
Bewertet in den USA am24. Januar 2024
I bought these clamp on bucket forks specifically to use as brush forks for moving and stacking brush on a fence line clearing project and they have been a welcome, inexpensive labor saver for that. I considered the shorter four-tine type debris attachments but preferred these longer forks for the extra reach. By curling the bucket up/back, much of the weight rides closer to the bucket itself in kind of a cradle between the forks and a backstop that I made to fit in the provided upright slots. However, by using the backstop slots the reinforcing chain slots are not open for heavier flat-carry loads. Oh well, the bucket I'm using is fairly heavy duty and haven't noticed any bending so far under modest loads, and I plan to keep it that way. Also, having enough rear counterweight on the tractor is important for safety since the load is farther out front. My main complaints are that I'm having to re-tighten the clamps regularly (with a short piece of cheater pipe for enough leverage) and I'm concerned about the threads stripping out over time. Also, the forks will move out of alignment fairly easy if much side pressure is applied. The middle stabilizer bar does help somewhat to keep the forks aligned but the wing-nut set screws are dinky and also need periodic re-tightening.I did consider a set of dedicated quick-attach pallet forks but just wouldn't use them enough to justify the cost difference and actually need the extra forward reach that these forks provide. So, by keeping these clamp-ons tight, going slow and deliberate, and approaching the loads as straight-on as possible, I've been able to move/stack more brush for burning faster than my back could ever tolerate. Your needs may differ, good luck!
Rebecca C.
Bewertet in den USA am22. Dezember 2024
We have purchased multiple products from Vevor and these forks are no exception to the quality. For the price we couldn't believe the durability and weight of these when they came. Easy to install and remove. We use these extensively on our farm with zero bucket damage. Everything from moving large pallets to moving hay bales, never one problem with stability or functionality. The design will allow use on multiple size buckets. Fit our 60-in perfectly. Well pleased!
Produktempfehlungen
299.99€
99 .00 € 99.00€
549.95€
99 .00 € 99.00€
864.95€
99 .00 € 99.00€