Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
kats
Bewertet in Italien am 9. Juni 2025
Kit per creare oggetti in resina ( ad asciugatura rapida ) con lampada luce UV inclusa!Nella scatola troviamo il barattolo con la resina,la lampada uv ricaricabile tramite cavo tipo C (in dotazione),due stampi per la creazione di portachiavi,due pinzette per l'inserimento di oggetti nella resina,un laccetto per la lampada e il manuale istruzioni ( queste si possono seguire anche guardando le foto sul sito).Questa resina ad asciugatura rapida permette di creare diversi oggetti in tempi brevi!!! La lampada UV aiuta nel processo!Trovo che sia un'ottimo set venduto ad un prezzo ragionevole!
Graphic Fusion
Bewertet in Spanien am 9. Juni 2025
I confess I was interested in this UV-cure resin more as an adhesive/glue than for making key fobs. It's pretty amazing stuff. The UV flashlight was plenty bright and achieved a rock-hard cure in the promised 3 minutes. I tested this resin by gluing a screw to a coin. First I tried gluing the head down, but the UV light did not reach under the head, resulting in less than a total cure. Then I tried gluing the threads down, and that worked fine. Ultimately the bond to the coin wasn't perfect, and the epoxy could be pulled off. However, the bond would be quite good, I think, if the surfaces were roughened. Just be aware that a total cure requires UV light reach every part of the resin. There appears to be no chain reaction, whereby polymerizing resin induces adjacent resin to polymerize (at least within a short amount of time).The same would be true of crafts. Make certain you are able to shine UV light into every little area of your project, or you might not get a full cure, at least not right away. I think if you are making a key fob, you can first cure the resin on top and then flip the piece over, to shine UV light through the silicone rubber mold.So as to try something crafty, I thought I'd make a 3-D doodle, sort of like 3-D printing, except by layering up resin. I made a swirly resin tower off of the coin base to triumphantly display the screw I'm reviewing next. :-) It was fun. I found that it was only necessary to hit the resin for about a second to firm up each layer. By leaving each layer only partially cured, I could "hot bond" the next. I'll add this to my collection of little doodles that clutter my desk. ;-)Anyway, this resin is useful, practical, and fun. I can enthusiastically recommend it.
Geibig
Bewertet in Frankreich am 8. Juni 2025
Très pratique pour réaliser vos propres créations , également pour réparer quelques objets , très pratique la lampe pour le durcissement de l'objet en créationTrès bon rapport qualité prix , je recommande vivement cet achat.
Matteo Sgherri
Bewertet in Italien am 8. Juni 2025
Confezione piccola, adatta a Principianti. Resina uv facile da usare e ad asciugatura piuttosto rapida
Heather G.
Bewertet in den USA am31. Mai 2025
I love crafting, and this is a great introduction to resin projects. It comes with four key chain attachments. So, I assume there will be enough in the bottle for four, though I've only made one at this point. The directions were clear. The UV flashlight worked well and the timing on the instructions was perfect. There is a connection cord to charge the flashlight. I love that I don't have to constantly buy batteries for it. My project isn't perfect, as it was my first time using resin, but it turned out well. A tip sheet might be nice or more neutral colors on the key chains (mine were pink), but that didn't limit my enjoyment of the product. And it came in a cute box that will keep everything in one place. If you're interested in resin projects, this kit is priced perfectly to let you experiment with the craft and find out if you're going to enjoy it.
Tia Rella
Bewertet in Deutschland am 10. Juni 2025
Das Set enthält das komplette notwendige Zubehör, um das Arbeiten mit UV-Kunstharz auszuprobieren. Das Harz muss nicht erst angemischt werden und trocknet schnell. Die Lampe liegt gut in der Hand. Ich hätte mir noch eine Feile oder leichtes Schmirgelpapier gewünscht, um die Artefakte zum Abschluss polieren zu können.
Produktempfehlungen