Ich bin sehr zufrieden mit der Schuhaufbewahrung. Leicht und schnell zusammenzubauen. Nun sind die Schuhe hinter der Tür "unsichtbar". Für meine Zwecke perfekt gelöst.

Föllig billiges Material und man sollte dazu sagen dass man immer Löcher in die Tür bohren muss....ging zurück,gür den Preis inakzeptabel...m

there is no way more than 10 shoes fit this. Absolutely awful, shoes don’t even fit and just fall off. Don’t buy

Gutes System für die Aufbewahrung von Schuhen. 36 Paar Schuhe, also 3 Paare oder 6 Schuhe je Etage gehen auch bei schmalen Damenschuhen nicht rein; max. 5 Schuhe.Die Aufhängung an der Tür o.k., aber die Tür lässt sich mit dieser Aufhängung nicht mehr schließen. Also Umbau der Aufhängung erforderlich.

There were not sufficient poles supplied

Excelleny quality, I am very happy with this purchase, holds all the shoes as described. It is screwed to the door for extra strength

I bought this shoe organizer for my wife and I am very happy with it (she is too). I tried one of those organizers that is like a big sheet with a bunch of pockets on it... useless. The pockets were too small to hold 90% of the shoes she has (just one shoe per pocket), and shoes that have any kind of weight to the heel pull on the pocket and hang way out away from the door. That thing got returned.But this one I like. The "shelves" are deep enough to hold just about any kind of shoe, and the construction is sturdy enough that I feel pretty confident that it will last. The metal tube frame is very lightweight but the design is good and it seems like it will do the job long term. The hooks that go over the door are padded on the inside and the frame has plastic endcaps on the parts that touch the door, so I don't expect it to do any damage to the door.Now, as far as the assembly goes - yes, it comes with a full-size, multi-page instruction manual that is well written and has large, easy to comprehend diagrams, but the sequence of steps should be changed up to make the process much easier. The manual instructs you to assemble one vertical support and attach ALL of the horizontal rods in the first step. After having done this, you are supposed to slide the single piece mesh shelving over all of the horizontal bars. Imagine this and you'll understand. The mesh is extremely lightweight and porous, and the sleeves that fit over the horizontal rods are fairly snug. This means that you will have to slide a couple inches onto one rod, then a couple inches onto the next rod and so on. The whole time you are doing this, the mesh that you put over the first few rods is actively trying to work itself off. This is pretty frustrating and it takes a relatively long time to get all of the mesh over all of the rods.Here's my recommendation:1. Assemble the two vertical supports and hang them over the door at the proper distance apart.2. Connect the top horizontal rod to one side and slide the top sleeve of the mesh material completely onto the tube.3. Loosely connect the first rod to the other vertical support so that the mesh is trapped and can't go anywhere.4. Then slide the remaining horizontal rods into the remaining mesh sleeves and loosely connect both ends to the vertical supports.5. Repeat this until all of the rods are in place and then tighten everything up, making sure not to pinch the mesh at either end.6. Stand back and marvel at how easy that was.This is how I wish I had assembled it. Efficient. Stable. Zero frustration. Try it out and let me know.

Place perfectly behind the door.