Ihr Warenkorb ist leer
Ihr Warenkorb ist leerSchraubenausdreher-Set, Sechskantkopf, Multi-Spline-Schraubenausdreher-Set, 29-teilig
Jim Aldridge
Bewertet in Kanada am 17. März 2025
Work great
Woody B
Bewertet in den USA am10. Juni 2025
This set works great, saved me a couple times already getting broken bolts out. I love that it has a chart that shows what drill bits to use with each extractor. I recommend this product.
KnuckleBuster
Bewertet in den USA am30. April 2025
This is one of those things you don't want to skimp on and this was well worth the cost.I had to remove armrests from a high-end office chair and what should've been a 5-minute procedure turned into at least 2-hours. Not only were the stripped bolts made of high-quality Carbon Steel with high strength and anti-corrosion, but they also had thread lock on them.Once the new extractor set came, I drilled a slightly deeper hole with an M42 drill bit (also for very hard metal) and twisted the extractor in by hand. After a quarter of a turn, it bit in so well, I didn't have to tap it in with anything. I removed it with a small handheld, multi-socket tool in a few minutes. It would've been quicker, but I had to address the nut on the other end that kept spinning as I was trying to remove it. That too, was impossible to get at so I shimmed it to keep it from turning.I've spent countless hours, if not days of my life removing broken and stripped nuts and bolts and it's no fun. This set made it easy and fun again! Also, if you're going to buy an extractor set, get a set that works for the worst case scenario. That means being able to remove automotive-grade bolts. Same goes for the drill bits. This way, you'll be able to use them on any type of metal. The cheap sets break and wear down so fast if you use it on anything besides cheap, soft metal.Thanks a lot for making a product that finally works!
Aurelio alberto flores rocha
Bewertet in Mexiko am 28. August 2024
Muy completo y todo en buen estado
Ray B
Bewertet in Kanada am 16. Juni 2024
Rescued me from a potentially frustrating task of extracting the end of an air compressor valve that had broken off in the thread of the tank. I inserted one of the proper sized extractors, and within a couple of minutes the stubborn part came off. Quality seems robust and does the job!
Karsten
Bewertet in Deutschland am 4. Juni 2023
Gewinde von einer Zündkerze abgebrochen...mit diesen Werkzeug konnte ich ohne Probleme, das abgebrochene Stück entfernen. Genial...
Richard Schindler
Bewertet in Deutschland am 12. Dezember 2023
Super werkzeug.hat problemlos geklappt die abgerundete schraube rauszunehmen
Produktempfehlungen
![HELDENKRAFT® Schraubenausdreher Set [5 Größen inkl. Zubehör] - strapazierfähige Linksausdreher aus Stahl zum Entfernen beschädigter Schrauben - mit Aufbewahrungsbox & Stahlbürste](images/loading.gif)