Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDie Xuron Corporation ist ein US-Unternehmen, das dafür bekannt ist, einige der besten Fräser und Zangen herzustellen. Wir führen eine Reihe ihrer hochwertigen Micro Shear-Marken, ideal für Modellierarbeiten. Alle Handschneider und Zangen sind gut gebaut und mit komfortablen Handgriffen ausgestattet. Einzigartig geformte Klingen zum Formen von Draht und für Messstreifen aus Messing und Aluminium. Ideal auch zum Einstellen von Auslösestiften an N-, HO- und O-großen Kupplungen. Ein ideales Werkzeug für den Modellbauer.
P. Meyer
Bewertet in den USA am18. Februar 2025
These are perfect for forming z-bends in stainless steel spring wire up to about .8mm which is .031 inches. This kind of wire is extremely stiff and very difficult to bend into tight shapes without a plier like this.A z-bend is two 90º bends in opposite directions immediately adjacent to each other. Together they form a step. These pliers will only bend .8mm wire to about 80º but it’s easy enough to finish the bend with a two pair of needle nose pliers.Spring wire diameters above .8mm will probably deform the v-channel jaws and in any event do not form well due to the very small geometry of these v-channels but for .8mm wire or smaller these are great. I bought 3 or 4 different types of wire bending pliers after getting these and never found any that work this well on really small diameter wire with small step z-bends.Z-bends in .8mm wire made with these pliers can be as small as about 2.35mm from outside to outside.A z-bend allows you to insert the wire through a hole in say some .5mm sheet plastic and then turn it so each tail lays flat on opposing surfaces with the bend going through the hole. I use them to attach a couple of square inches of plastic sheet to a spring wire beam to form the sail of the vane on diy anemometers that I build.
tony anderson
Bewertet in den USA am4. Dezember 2024
I bought this for making HO scale locomotive handrails and grab irons from .012 - .020 brass rod. I use a fixture to get a precise length between bends, but it never gives sharp 90 degree bends. I use these pliers to refine the bends. Works very well for this purpose.
Charles Brady
Bewertet in den USA am2. September 2024
These are very nice and very high quality. Fit very nicely in your hand and easy to get into tight places which is great when doing wire wrapped rings.
Farmer Grey
Bewertet in den USA am10. Dezember 2024
This works well with thin wire and flat stock. Ideal for model making
Hi mtn maker
Bewertet in den USA am1. März 2016
Worth the price --- Works perfectly
Produktempfehlungen
31.26€
14 .99 € 14.99€