Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

BougeRV Li 30A PWM Solar Charge Controller 12V 24V, with Backlit Display, USB Port, Negative Ground Battery Intelligent Regulator for Solar Panels Compatible with LFP, AGM, SLD, FLA, for RV, Off-Gird

Kostenloser Versand ab 25.99€

39.89€

16 .99 16.99€

Auf Lager

1.Stil:30 A Pwm-controller


2.Material:Abs-kunststoff


  • Leicht ablesbares Display mit Hintergrundbeleuchtung: Um den PV-Status und den Batteriestatus leicht zu überprüfen, wird der 30-A-Solarmodul-Regler den PV-Eingangsstrom und die Batteriespannung an der Hauptschnittstelle mit Echtzeitwert alle 3 Sekunden zyklen. Größerer Bildschirm und 50% Helligkeit in keinem Betrieb, der Solarladeregler ist bei schwachem Licht leicht zu lesen. Ermöglicht es Ihnen, genau zu sehen, was der Controller getan hat und wie viel Strom von den Panel(n) aufgenommen wird.
  • 【Li-Kompatibilität】 Nicht nur kompatibel mit traditionellen Batterien, der PWM-Controller verfügt auch über klare und spezielle Symbole für verschiedene Lithium-Batterien auf dem LCD-Bildschirm, wie LFP für LiFePO4, Li für Ternary Lithium-Batterie, LTO für Lithium-Titanoxid. Mit Einstellung auf Li-Akkutyp verfügt dieser Solarladeregler auch über eine Funktion, um Ihre Lithiumbatterie zu starten, falls sie übermäßig entladen wird. Sie müssen keinen neuen Controller für die verbesserten Lithium-Ionen-Akkus kaufen.
  • Akku-Kompatibilität und Wartung: kompatibel mit verschiedenen 12-V- oder 24-V-Batterien, wie SLD, FLD, GEL, AGM, SLA, LiFePO4, ternäre Lithium-Batterie und LTO-Batterie. Einschließlich der Fähigkeit, den Solarladeregler für das beste Laden und die Wartung verschiedener Batterietypen zu programmieren. Der Solarpanel-Regler ist zuverlässig, um Ihr Batteriewartungsgerät zu sein.
  • Solarpanel-Regler: Max PV-Eingangsspannung 55 Volt, dieser Solarpanel-Regler kann 450 Watt Eingang für 12-Volt-Batteriesystem verarbeiten, 900 Watt Eingang für 24-Volt-Systeme.
  • Saubere und sichere Verkabelung: Kommen Sie mit 3 Paar Flachsteckern, es ist einfach, die Drähte fester zu greifen und eine ordentliche Verkabelung zu machen. Bitte beachten Sie, dass Sie den Schraubendreher zuerst gegen den Uhrzeigersinn drehen, um die Drahtklemmlöcher zu öffnen. Schließen Sie zuerst die Batterie an, positiver Draht, dann negativer Draht. Schließen Sie danach den Controller an das Solarpanel an, bitte beachten Sie, dass Sie die Batterie nicht trennen, wenn die Solarmodule aktiv sind.
  • 【Erinnerung】Dieses vor dem 27. September verkaufte Produkt hat nicht die Funktion, eine Verbindung zur APP herzustellen. Die neue Version, die nach dem 27. September gekauft wurde, hat die Funktion, eine Verbindung zur APP herzustellen.



Produktinformation

BougeRV ist als Marke für nachhaltige Energie bekannt, deren langfristige Vision es ist, eine nachhaltige Zukunft für die Menschen zu schaffen, indem sie Solarproduktlösungen aus einer Hand anbietet.

Vorbei sind die Tage der traditionellen Kühlboxen, wenn Sie jetzt einen tragbaren BougeRV-Kühlschrank in Ihr Outdoor-Leben einbringen können, der Ihnen ein besseres und gesünderes Leben ermöglicht.


Samnmo
Bewertet in den USA am21. Februar 2025
BougeRV Li 30amp PWM Solar Charge Controller. I needed to replace my old solar charge controller with a unit that would fully charge a LiFePO4 battery. This charger had decent reviews, and the price was very good at the time of purchase. This controller is quite simple to set up. It allows you to set a range of options that include all the current battery types and provide display information that is easy to understand with a welcome backlight. I was hoping that I could find a controller that had Bluetooth connectivity, and this new unit has that. You will need to download the app and follow the instructions in the app. I monitored my charge from about 50 feet away and was able to connect and receive progress information without errors.What I like: Easy to set up. The Bluetooth connection is helpful. I also like that the unit allows for a wide range of battery types and particularly for the LiFePO4 type batteries.Dislikes: I did not remove a star because these are not operational issues. There are a few things that I found could be improved but did not hinder the operation. One is the connector hole for the wire is small. 30 Amp calls for at least 12 AWG wire but anyone wanting to extend the cabling 20 feet or so away from their panels will want something larger. I like to have at least 10 AWG wires. The connector holes may not be large enough to accommodate 10 AWG. However, BougeRV provides small spade connectors. They are rather thin gauge. When installed, the plastic insulator will not fit all the way into the opening. The plastic must be crushed to reduce the size. Another thing is the confusing picture of the 30 Amp controller in the manual. The 30 Amp unit picture shows a set of heat cooling fins on the bottom. However, there are no fins. This makes one believe that they did not receive the 30 Amp unit. The model number on the unit says 30 Amp and I confirmed with customer service that this was the correct unit. It just no longer has cooling fins.Overall, this is a very good controller for the price, and yes, I would recommend it.
Paul B
Bewertet in den USA am20. Februar 2025
App works great I can see all the info I need on app. Easy install
Steven
Bewertet in den USA am3. Juni 2024
This is a pwm charge controller, so you have to remember they work best with short runs of cord (10-20 ft), and with panels in parallel. Very easy to read and set without directions. This is ideal for a portable setup, rv, trailer, or something directly outside your window. Running 4 100 watt panels in parallel you will close in on 300 w atts, but don't expect too much more. Depends on the panel too. I use Newpowa which typically run about 70%. HARBOR FREIGHT, Bouge RV and HQST panels have about the best output in the 100-watt category, but they are a little bit bigger. This is my fifth one of the lithium pwm series.
Leland 1.
Bewertet in den USA am9. August 2023
Shipping took 6 days. Sat in one location almost 3 days.I installed this in my 2010 forest river travel trailer. I did not have a solar system in it. I built it my self.A side from that l like it's looks and works properly. You should have basic electrical stripping and crimping tools to put on the flat terminals that come with unit. I got this unit for looks, function and protection. My last unit did not last and I wanted room to add more panels.Currently I'm happy with the unit. Worth the few dollars it costs.I would recommend this unit to potential buyer's.
Jaren H
Bewertet in den USA am4. August 2023
I've bought a few charge controller's over the past 5 years or so. I went this one mostly due to the name, reviews and price. I have bought a few of their products in the past and have been super impressed with the quality, given the price. This controller doesn't stray far from my prior thoughts. I like how it does not scroll through 5+ different values like the others I have. I really just want to know what the current battery's charge is at and how many amps am I getting from my panels. I know on this and most controllers you can hit a button to scroll through, but most of the time I just glance at it till I see what I'm interested in. With this just showing the battery and input values (with a shot interval), I'm not wasting time watching this thing. Also this was super easy to setup. Was my first time using a LiFePO4 battery and it already had the correct settings (but would of been real easy to adjust). I also liked how they included the connector spades (although making them Heat Shrink would of been even better). Some folks have said it's hard to read in direct sun and I would agree but I really didn't see this as a big issue. Like my headline said, it's a solid product and I don't think you'll be disappointed.
Produktempfehlungen

218.27€

90 .99 90.99€

4.7
Option wählen

43.73€

23 .99 23.99€

4.4
Option wählen

50.75€

24 .99 24.99€

4.8
Option wählen

15.45€

7 .99 7.99€

4.6
Option wählen