Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Kethvoz Carbon Dioxide CO2 Monitor T6-D8 is a air quality monitoring device equipped with NDIR sensor, which is used to measure the concentration of carbon dioxide gas in the air. Widely used in indoor spaces like homes, offices, schools, and hospitals.
FYI: NDIR or Non-Dispersive Infrared is a type of gas sensing technology commonly used in gas detectors, such as carbon dioxide monitors. It works by measuring the absorption of infrared radiation by a specific gas at a particular wavelength. This allows the NDIR sensor to provide precise measurements of specific gas concentration levels in the air.
Specifications:
- CO2 Gas Measure range: 400~5000PPM
- Temperature Range: -10℃~50℃
- Humidity Range: 0~95% RH
More Features:
- NDIR Sensor
- Audible Alarm
- Auto-Calibration
- ℃/°F Switchable
- ± 5% High Accuracy
- Adjustable Brightness
- 1.9” Color LCD Display
- Rechargeable 1000mAh Battery
Product details:
- Weight: 75g
- Size: 85 x 51 x 17mm
- Charge port: USB Type-C
- Standby time: 18 hours after full charge
Packing List:
- 1 x Lanyard
- 1 x Charging cable
- 1 x Carbon Dioxide CO2 Gas Monitor T6-D8
Ed
Bewertet in Deutschland am 6. August 2023
Die Messdaten sind ungenau.
Admiral S.
Bewertet in Kanada am 28. Juli 2023
I will definitely be taking this with me on any future flights or other travel situations. I am COVID aware, and I want to know how fresh or clean the air is in any given circumstance, especially planes.This unit came fully charged, and I could use it right away. It measured 560ppm in my house, and it measured 416ppm outside my house. That's probably pretty accurate.It also measures humidity and temperature.I has a brightness switch (3 settings) to control battery life.For the price, this is good value, in my opinion.I've never used the really expensive alternatives, so I don't know how this compares. But, to a layperson, this seems to give me enough information to make informed decisions.
GDS
Bewertet in Kanada am 28. Juli 2023
the other review points out it was jumping around, mine was too at first. I could get the levels higher, but it was very very very slow and coming down. with windows open and a fan blowing there was no way it was sitting at the max level for 10 mins.when It started to decrease it was slow and still stayed at 3x the normal back ground levels.then I read the instructions, and after calibrating it read as it should with a normal back ground level of C02. closer then the +/- 50ppm in well ventilated area.the temp and humidity was accurate.for the price this a good buy. want something better and you will pay much more.
Rob
Bewertet in Kanada am 17. Juli 2023
Readings bounce all over the place and cant seem to get a accurate rating.
Produktempfehlungen