Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Description
The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board.
The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
The STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART,
and bridge interfaces (SPI, I2C, CAN, GPIOs) allowing for instance the programming of the target through bootloader.
The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board.
Supported Software
STM32CubeProgrammer
KEIL RVMDK
IAR EWARM
GCC-based IDEs
Connect to STM32 applications
The STLINK-V3SET can be connected to STM32 target applications on JTAG / SWD interfaces, which are available on both the main module (MB1441) and the adapter (MB1440).
Three official STDC14 flat cables, plus an extra free legacy 20-pin flat cable, are delivered. Choose the proper one to use.
Connect to STM8 applications
The STLINK-V3SET can be connected to STM8 target applications on SWIM interface, which is only available on the adapter (MB1440).
JP4 and JP6 on the MB1440 board must be ON in order to activate the SWIM protocol
We also provide two extra free SWIM cables for easy use
Make sure the pin-to-pin mapping is correct, especially the VCC and GND, to avoid damaging the STLINK-V3SET
PACKAGE CONTENT
STLINK-V3SET x1
USB type A plug to micro B plug cable x1
20-pin JTAG/SWD flat ribbon (extra free) x1
SWIM dual 4-pin connectors cable (extra free) x1
SWIM 4-pin connector to separated pins cable (extra free) x1
Florian Lohoff
Bewertet in Deutschland am 8. November 2024
Man sollte meinen das SWD/JTAG so Standardisiert sind das das für alles gehen sollte, also z.b. alle Cortex-M varianten. Leider ist dem nicht so. ST Microelectronics hat in der Firmware absichtlich dieses Gerät kastriert so das es NUR mit ST Microcontrollern funktioniert. Also wer nicht ausschliesslich im ST Microelectronics universum unterwegs ist sollte zu einer anderen JTAG Probe greifen.
Zeboss
Bewertet in Frankreich am 26. November 2022
Parfait, bien meilleur que la première version qui était très lente et bourrée de bugs.
Produktempfehlungen
10.99€
5 .99 € 5.99€