Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Merkmale
- Die Lötstellen sind hell, voll und fest, mit weniger Rauch, ohne störenden Geruch.
- Keine Reinigung erforderlich, geringe Rückstände nach dem Schweißen, wodurch Reinigungszeit gespart wird.
- Bleifrei, halogenfrei, säurefrei, nicht korrosiv.
- Push-in-Design für gleichmäßigeres Fließen und keine Verschwendung beim Löten.
Fragen und Antworten
- Bei der Verwendung der Schubstange kann es zu Schwierigkeiten kommen. Dies liegt daran, dass das 30-CC-Rohr relativ groß ist und Luft im Inneren enthält, so dass es zunächst schwierig ist, es nach vorne zu schieben, aber nach häufigerem Gebrauch wird es glatter.
Produkt Enthält
- 1 x AEC-559-SFP-30CC 30mL Lötpastenflussmittel
- 1 x Schubstange
- 1 x Schubstangenspritze
- 2 x Dosierwerkzeugen
Einfach zu installieren
- Drehen Sie gegen den Uhrzeigersinn, um den Röhrchenverschluss zu öffnen.
- Im Uhrzeigersinn drehen, um die Nadel zu installieren.
- Öffnen Sie die untere Abdeckung.
- Installieren Sie die Schubstange.
Breites Anwendungsspektrum
- geeignet für LED, PCB, BGA, SMD, Mobiltelefonreparatur, Haushaltsgerätereparatur und Industrieausrüstung usw.
Daniel
Bewertet in den USA am24. Januar 2025
A must have for anyone doing work with circuit boards. I used to use soldering paste but that was to sticky and messy. This stuff works amazing and cleans up easy.a little goes a long way. Been using it to help mod PS5 boards.. highly recommend product
Meziane
Bewertet in Deutschland am 2. Februar 2025
Alles top. Keine Probleme beim löten entdeckt
Ulrich Lehnhardt
Bewertet in Deutschland am 16. Januar 2025
Einfach super, geht auch gut zu handhaben
slomobile
Bewertet in den USA am10. Februar 2025
I've used this on both leaded and lead free solder and both seem to be fine. I don't mind the loose plunger or the smaller tip. I tend to be a bit ham fisted and the combination of features helps (forces) me to slow down and use less strength and more patience. The removable plunger means it always packs down to the same length regardless of how full it is. And I'm not going to accidently squeeze some out in my toolkit when things shift. The result is clear, not yellow or brown so I guess you could avoid cleaning, but it still has a shiny glare that interferes with inspection. So cleaning with IPA helps me better see what I did.I
werner freudenberger
Bewertet in Deutschland am 9. Dezember 2024
Alles besten vielen dank
Kindle Customer
Bewertet in den USA am4. Oktober 2024
Exactly what I was looking for...
Steve
Bewertet in den USA am3. September 2024
I've been out of solder flux for too long. I keep telling myself ahhh it's fine without it but no it's not always. I decided to just go ahead and order some more from Amazon. I knew I wanted to try some that is applied via a syringe to make a, number of things easier for me. I also wanted to try a no-clean flux so I decided on this one.First impressions were that the kit comes with a few things extra like a 2nd smaller but empty syringe and 2 different sized tips. One thing I wasn't really expecting was the plunger for the flux is not built in nor can be made fixed by any means I can see. When you need it you just slide the plunger in and press but setting the flux down can easily initiate said plunger coming out and rolling away. I guess this is good and bad, good because it packs up smaller but bad because you could lose the plunger.As for the flux it worked pretty well, it did smoke more than I anticipated so be prepared for that. Was it a used car tire soaked in diesel amount of smoke no. It was more like a candle being snuffed, everytime you heated some flux up. Regarding the no-clean side of things, that's subjective. For me it liquified into a pretty decent clear pool around the flux. Now being no-clean means it's not supposed to be corrosive but given the size of the pool created it's probably better to clean it up with IPA in many cases.All in all I like it and I just wish the plunger could be fixed in place.
kerry smith
Bewertet in den USA am20. November 2024
The flux was easy to
N.j
Bewertet in Deutschland am 1. November 2024
Komplett weiße Paste und schwer zu reinigen - klebt ohne Ende . Wer Lust hat mehr Zeit in Platinen reinigen zu investieren ist hier genau richtig 👍
Produktempfehlungen